DPCM X - Detailed Change-Log Last update: 26 March 2024 ================================================================================ DPCM X 10.5.5 (GA: 27.03.2024) ===================== Changes/Enhancements: [DPCMSG-1830] add rpmbuild of dpcm-lnx-utils to build-pipeline [DPCMSG-1915] HANA Install Parameter: --volume_encryption[=off] [DPCMSG-1920] CoreNode Part of SystemSriovPhysRocePort object (command, parser, inventory) [DPCMSG-1921] AppNode Part of SystemSriovPhysRocePort object (UI) [DPCMSG-1922] iScsi Support for VSCSI Disk Mappings [DPCMSG-1923] CoreNode Part for iScsiHdisk object including command and parser [DPCMSG-1924] AppNode Part for iScsiHdisk object including handling of VSCSI mapping functionalities [DPCMSG-1925] AppNode Part to support CSSP LogicalUnits for VSCSI mapping functionalities [DPCMSG-1930] Update and Create Mocha tests for testing SystemSriovPhysRocePorts (_runSystemSriovUpdate) [DPCMSG-1935] Improve extraction of core node generated exceptions [DPCMSG-1936] Enhance CPU Perf Query results with LPAR name [DPCMSG-1938] change "SAP ID" and "SAP System Number" in all installation-dialogs [DPCMSG-1959] Set Connection Host by LPAR Tag Fix: [DPCMSG-1714] misleading handling of dialogs for actions [DPCMSG-1905] missing and wrong preselection of SPOT and Bosinst-Data [DPCMSG-1906] unable to change OS-Group with orphaned resources [DPCMSG-1909] Unable to start Global LPM: Insufficient Privileges [DPCMSG-1910] max retries exceeded with url: /api [DPCMSG-1911] pending API requests and bad response times for UI updates [DPCMSG-1912] Protect Against Special Chars: Add exclusion for UDIDs [DPCMSG-1913] LINUX Deployment with Netapp LUNs using VSCSI are not working [DPCMSG-1914] HANA Installation with Netapp LUNs using NPIV are not working [DPCMSG-1919] LPM related issue to get possible VFC Mappings [DPCMSG-1926] CSSP Pools only updating for 1 VIO of cluster [DPCMSG-1927] Remove internal hyperlinks from form dialogs [DPCMSG-1928] Removing VSCSI mappings not possible for NIM itself [DPCMSG-1929] Global Recreate: Missing LPARs not visible [DPCMSG-1931] Profile Deploy fails b/c of invalid adapters [DPCMSG-1933] Missing stack for core node error messages [DPCMSG-1934] LPAR allowed to start while the linked LPAR is starting up [DPCMSG-1939] Storage Entity queries take too much time [DPCMSG-1940] change precheck in coreNode commands to allow a maximum of 15 characters for property vtdName [DPCMSG-1941] change UI / AppNode prechecks (createVscsiMapping) to allow a maximum of 15 characters for property vtdName [DPCMSG-1956] Removing assignment to OS Group not permanently [DPCMSG-1957] Error on creating VSCSI Mapping for CSSP LogicalUnit [DPCMSG-1958] edge-cases which allows to start linked LPARs while starting LPARs [DPCMSG-1960] Linking LPARs does not work correctly for global Recreate ------------------------------------------------------------------------------------ DPCM X 10.5.4 (GA: 23.02.2024) ===================== Changes/Enhancements: [DPCMSG-1862] change current configuration enhancements [DPCMSG-1867] Dockets to add and delete vNIC adapters with Failover using HMC RAW Commands [DPCMSG-1898] VM Deploy using Ansible / Dockets for AIX + LINUX SAN-booted [DPCMSG-1901] Optionally omit remoteSlotNum in adapter-related mutations [DPCMSG-1903] Dockets to parallelize global LPM and serialize global LPM in order of given LPAR-Names Fix: [DPCMSG-1783] unclear message queued backup of vm .. must be cancelled [DPCMSG-1786] unclear behavior of cleanup orphaned adapters for VIO [DPCMSG-1798] missing Backup-List for cloned / recreated LPARs + not all mksysbs are available for restore-os [DPCMSG-1839] lunName property of Hdisk (FcHdisk/ScsiHdisk) not populated [DPCMSG-1863] SR-IOV: Fix Logical Ports handling [DPCMSG-1866] Item Conditions / Prompts also changing in cloned dockets [DPCMSG-1897] Unable to Restore-OS because of SPOT and Bosinst_Data won't be preselected and it is impossible to select any SPOT and Bosinst_Data [DPCMSG-1904] backups fails because of connectTimeout=3 too low [DPCMSG-1868] Import Dockets: Group property missing ------------------------------------------------------------------------------------ DPCM X 10.5.3 (GA: 22.01.2024) ===================== Changes/Enhancements: [DPCMSG-1733] - Archive Created Mksysbs [DPCMSG-1825] - get DPCM X Version for VIOMGR service from CoreNode Fix: [DPCMSG-1799] - Loading-Failed Indicator hides Download button at ActionTable [DPCMSG-1823] - Parsing issues with NETAPP and DS3500 [DPCMSG-1824] - Not Exisiting Backup shown on Backup List ------------------------------------------------------------------------------------ DPCM X 10.5.2 (GA: 13.01.2024) ===================== Changes/Enhancements: [DPCMSG-1787] - adding showing Synchronize Current Profile into overview of LPAR details [DPCMSG-1788] - disable changing "Processor Mode" for Change-Current-Config [DPCMSG-1790] - disable VIOS in list of VMs of global recreate as long we do not support handling of physical IO adapters [DPCMSG-1785] - renaming lpar-detail tab "created backups" to "backup list" to show all backups [DPCMSG-1792] - LPM/Global LPM using full cloning mechanism [DPCMSG-1795] - Alphanumerical sort "Associated LPARs" in PVs table of Storage Systems [DPCMSG-1797] - Disable adapter management of VIOs temporarily [DPCMSG-1774] - add new POWER10 models to powerSystemsLookup [DPCMSG-1793] - Adjust hint for CPU Mode difference "LPAR OS version..." Fix: [DPCMSG-1791] - missing AIX/VIO Backups created with DPCM V1.8.12 in list of selectable backups of restore-dialog [DPCMSG-1796] - Profile Clone: Lookup Target NPORT correctly by NPORT Group/Fabric [DPCMSG-1763] - GRPC Error:8 RESOURCE_EXHAUSTED: Received message larger than max [DPCMSG-1775] - Fix no Vms Scheduled Backups [DPCMSG-1754] - Unable to change current configuration of VM: Can not queue command: The PV/Storage Entity is reserved ------------------------------------------------------------------------------------ DPCM X 10.5.1 (GA: 04.01.2024) ===================== Changes/Enhancements: [DPCMSG-1762] - Allow parallel running Profile Deploys [DPCMSG-1764] - adding locationCode of vNic-Backing-Device in LPAR details of VNIC [DPCMSG-1765] - hide terminal-tab in LPAR details for LPARs with lparEnv = os400 [DPCMSG-1767] - Hide Firstboot Options in Clone NIM dialog Fix: [DPCMSG-1755] - Unable to change current configuration of VM: Can not queue command: Some properties of the LPAR profile for the VM to be changed are reserved [DPCMSG-1758] - NIM Node cannot be changed or added with Enabled set to true [DPCMSG-1759] - Not all systems of data centers selectable in Global Recreate [DPCMSG-1760] - Bulk Change Backup Settings not working, no backup groups visible [DPCMSG-1761] - Rescan SAN Docket failed because of wrong templating ------------------------------------------------------------------------------------ DPCM X 10.5.0 (GA: 20.12.2023) ===================== Changes/Enhancements: [DPCMSG-1184] - Create VETH Adapter (current-config/profile) [DPCMSG-1186] - Create VFC Adapter (current-config/profile) incl. NPORT-Mapping (NPIV) [DPCMSG-1185] - Create VSCSI Adapter (current-config/profile) incl. Mappings [DPCMSG-1180] - Delete VETH Adapter [DPCMSG-1182] - Delete VFC Adapter and NPORT Mappings (NPIV) [DPCMSG-1181] - Delete VSCSI Adapter and Mappings [DPCMSG-64] - Backend: service for reserving resources [DPCMSG-1685] - DPCM X R10.5.0 Housekeeping [DPCMSG-1751] - Added + updated example Dockets for DPCM X 10.5 [DPCMSG-1522] - VIO Cleanup [DPCMSG-1734] - Select Adapters for Vio Cleanup [DPCMSG-1749] - Block VIO Cleanup while actions are running for System or VIO [DPCMSG-1146] - Profile Management: Change real profiles - Add/Remove adapters [DPCMSG-1721] - VSCSI Adapter: Add multiple mappings at once [DPCMSG-1707] - CoreNodeCmd - removeVscsiMapping (remove VSCSI Mappings for RUNNING AIX/LINUX LPARs) [DPCMSG-1744] - System: IO Slots UI [DPCMSG-1484] - identification of valid / invalid LPAR profiles / current-configurations [DPCMSG-1617] - showing System- and LPAR-LED depending on detailed and combined states [DPCMSG-1723] - UI: Better indication of network problems [DPCMSG-1738] - AppNode/UI: Changing System LED-State [DPCMSG-1737] - CoreNodeCmd: changeSystemLedState (Changing System LED-State) [DPCMSG-1610] - CSSP Inventory Refactor [DPCMSG-1690] - Failure Mocha Tests for Cssp Inventory [DPCMSG-1643] - Refactor the get functions which are used for CSSP [DPCMSG-1688] - Successfully Mocha Tests for Cssp Inventory [DPCMSG-1637] - refactor Cssp subclasses [DPCMSG-1614] - refactoring getClustersAndCSSPsWithShell to _getClustersAndCSSPsWithShell [DPCMSG-281] - refactoring runCsspInventory to _runCsspInventory (lparInventoryService) [DPCMSG-1510] - Create DPCM User Guides [DPCMSG-1512] - Create Custom User Guide [DPCMSG-1683] - Custom User Guide image upload limit [DPCMSG-1514] - Delete Custom User Gide [DPCMSG-1513] - Edit Custom User Guide [DPCMSG-1511] - Custom User Guides [DPCMSG-1523] - Link User Guides [DPCMSG-1282] - DPCM User Guide Component [DPCMSG-1626] - Backup Groups: Option to include all existing LPARs at creating group [DPCMSG-1691] - VMBulkBackupSettings [DPCMSG-1545] - Add Bulk Funktion to delete multiple mksysb [DPCMSG-1684] - OS Restore (AIX): Change default PV selection [DPCMSG-1746] - change property dpcmVersion of sysInfo object from hardcoded string '1' to real value of property dpcm_bkp_vers from file dpcm_sysb.info [DPCMSG-1739] - Add Navigation Mksysb View [DPCMSG-1527] - Global Backup Summary Status Update [DPCMSG-1708] - CentOS 9 Support (LINUX: install, backup, restore) [DPCMSG-1736] - add .kshrc to /home/viomgr to load some helpful functions and aliases [DPCMSG-1724] - Only Alphanumeric Nim Client & Host [DPCMSG-1728] - Hide Connection Props and Status for Non-SVC SAN Storage [DPCMSG-1696] - React 18 Concurrent Mode [DPCMSG-1722] - VETH Adapter: Support Hypervisor VLAN [DPCMSG-1579] - switch in any dialog of memory settings (megabyte / gigabyte) [DPCMSG-1573] - unclear VM Connection details [DPCMSG-1743] - unclear and misleading naming convention for creation of SAN Aliases for Host-VFC-Adapters [DPCMSG-1495] - Clean Backup Code Smell [DPCMSG-1748] - Improve Command Error messages [DPCMSG-1572] - sorting and grouping LPAR actions (buttons) Fix: [DPCMSG-1706] - AME not showing in Change Current Config [DPCMSG-1731] - Add and Delete Adapter commands failed in case of Lpar.syncLparProfileHandling.PROFILE_ONLY and currProfileName equal profileName [DPCMSG-1732] - Add/Delete VETH/VSCSI/VFC Adapter for Change-Profile failed (changeLparProfile with force) [DPCMSG-1694] - Backup Settings: Hide if env is not supported [DPCMSG-1697] - Gateway errors at logins with new installation [DPCMSG-1682] - LPAR Creating failed , it creating with same adapter [DPCMSG-1699] - OS/400 Create LPAR fails [DPCMSG-1712] - Recreate should be possible only for LPARs with lparEnv equal aixlinux or os400 [DPCMSG-1727] - Running SAN zoning commands not possible if SAN is not SVC [DPCMSG-1693] - Self-signed certificates rejected by Chrome [DPCMSG-1419] - Timed out while waiting for handshake [DPCMSG-1735] - Unable to shutting down docker daemon for RHEL & CentOS [DPCMSG-1745] - Viomgr Ssh Reconnect Issue [DPCMSG-1628] - filter of function dialogs not supporting searching by tags [DPCMSG-1742] - losing cursor focus while enter username and/or password in login dialog by typing first character [DPCMSG-1718] - misleading notes in confirmation dialog of OS Install [DPCMSG-1716] - misleading resource assignment for existing OS-Groups [DPCMSG-1664] - mksysbs created with DPCM must be not automatically associated to any AIX OS-Group [DPCMSG-1701] - wrong error message for definition of install-adapter in case of Client IP Label already used by existing NIM Client even if the IP address and host is not used and available for LINUX installations ------------------------------------------------------------------------------------ DPCM X 10.4.3 (GA: 10.10.2023) ===================== Changes/Enhancements: [DPCMSG-1467] - Client Dashboard: Load Command Details On-Demand [DPCMSG-1471] - Profile Delete: Remove Completely option not working [DPCMSG-1545] - Add Bulk Funktion to delete multiple mksysb [DPCMSG-1547] - Docker Logfiles: Decrease extended settings [DPCMSG-1594] - Add sudoUser property to NamagedNim [DPCMSG-1593] - Changing related CoreNodeCmds to get sudoUser from ManagedNim.sudoUser [DPCMSG-1592] - changing commands in nimCommandHelpers for switching to sudo command syntax [DPCMSG-1591] - change AppNode Mutations and API for Python-Modules to support VDISK-Mirror by createSvcLun [DPCMSG-1590] - support of VDISK-Mirror by createSvcLun [DPCMSG-1677] - Example Dockets for Post-Deploy-Profile to recreate SAN-Zoning and Storage-Host with LUN mappings for Remote-Mirror Scenarios [DPCMSG-1671] - Profile Deploy: Provide storageIds to Post-Docket [DPCMSG-1502] - SPOT Install method for create VM and Install OS (AIX) [DPCMSG-1561] - add parameter installType to input parameter object nimResources for CoreNodeCmd aixInstall [DPCMSG-1562] - Add selection of installType into dialogs of Install OS and Create new VM (AIX only) [DPCMSG-1504] - optional parameters for AIX install methods to choose image_data and/or nim_script [DPCMSG-1546] - Add imageData CoreNode objects to NIM inventory [DPCMSG-1563] - Add selection of additional resources NimImageData + NimScript into dialogs of Install OS and Create new VM (AIX only) [DPCMSG-1503] - adjustable timeout property for os install and restore [DPCMSG-1559] - Add command parameter installTimeout to CoreNodeCmd linuxInstall [DPCMSG-1557] - Add command parameter installTimeout to CoreNodeCmd aixInstall [DPCMSG-1555] - Add command parameter restoreTimeout to CoreNodeCmd restoreLinuxBackup [DPCMSG-1553] - Add command parameter restoreTimeout to CoreNodeCmd restoreVioBackup [DPCMSG-1551] - Add command parameter restoreTimeout to CoreNodeCmd restoreAixBackup [DPCMSG-1552] - Add parameter restoreTimeout to restoreAixBackup dialog [DPCMSG-1554] - Add parameter restoreTimeout to restoreVioBackup dialog [DPCMSG-1556] - Add parameter restoreTimeout to restoreLinuxBackup dialog [DPCMSG-1558] - Add parameter installTimeout to aixInstall dialog (Create VM and Install OS) [DPCMSG-1560] - Add parameter installTimeout to linuxInstall dialog (Create VM and Install OS) [DPCMSG-1660] - additional timeout parameters required for CoreNodeCmd restoreAixBackup [DPCMSG-1661] - additional timeout parameters required for CoreNodeCmd restoreVioBackup [DPCMSG-1662] - additional timeout parameters required for CoreNodeCmd aixInstall [DPCMSG-1659] - additional timeout parameters required for AIX/VIO install+restore to handle installation steps taking longer in specific customer environments [DPCMSG-1550] - rename Installation Monitor Timeout of Linux configuration in NIM-Node [DPCMSG-1569] - additional input field "Timeout Cleanup Snapshot" required in AIX-Node-Configuration [DPCMSG-1657] - Handle VIO association between NPORT Groups [DPCMSG-1597] - Handling systems in state "No Connection" where the HMC returns a UUID of "undefined" [DPCMSG-1631] - ManagedVmc._getBasicSystemsUpdateAsync return AppNodeError in case of errors in result-object of vmcCommandHelpers._parseAllSystemsOutput [DPCMSG-1624] - adding script option for support-data script to collect inspect-JSON and JSON-Logs for all containers independent of container state [DPCMSG-1585] - improving output of rollback script using prune option [DPCMSG-1603] - Secure CoreNode Against Code Injection [DPCMSG-1604] - AppNode: Protect mutations against special characters [DPCMSG-1605] - AppNode: Ensure user names are alphanumerical [DPCMSG-1606] - Frontend: Ensure user names are aphanumerical [DPCMSG-1564] - AppNode API Workers: Increase possible values [DPCMSG-1576] - Unclear functionality of priority for VLANs listed in Network configuration [DPCMSG-1580] - Unclear Field-Description/Naming of selecting dockets [DPCMSG-1581] - IP range and default-value of default-gateway won't be changed automatically by changing NET/CIDR [DPCMSG-1582] - allow changing Slotnumber for defined adapters in create new VM dialogs [DPCMSG-1583] - Preselection in fields where only one property is available [DPCMSG-1588] - LINUX does not support _ and other special characters as hostname excepted . and - [DPCMSG-1595] - Add sudo handling to NIM [DPCMSG-1598] - AppNode/UI: Use Server-Sent Events (SSE) instead of Websockets [DPCMSG-1602] - Arrows in number input fields jumping at errors [DPCMSG-1630] - Disable Reservation Management for Global LPM/Recreate [DPCMSG-1635] - cleanup and deletion of existing virtual profiles are required before global Recreate [DPCMSG-1673] - Disable Missing Handling for adapters [DPCMSG-1675] - Mksysb Commands: Add Verbose Option [DPCMSG-1497] - Set host after createVM [DPCMSG-1521] - Default Config Node for VMs [DPCMSG-1476] - Linking/Unlinking LPARs / Handling Linked LPARs (Recreate) [DPCMSG-1668] - Bulk Sysb Info [DPCMSG-1670] - Enhance OS Group Overview Tab Fix: [DPCMSG-1646] - Backup LINUX LPARs not working [DPCMSG-1666] - backup + restore of traefik-config for remote-host does NOT work correctly with dpcm_x_sync.sh (cold standby) [DPCMSG-1589] - bootObject on NIM master is undefined after NIM master inventory [DPCMSG-1565] - hanging backup processes for AIX in case of rootvg is locked and snapshot option enabled [DPCMSG-1676] - parseDpcmSysbInfo fails because of dpcm_sysb.info includes multiple mac-addresses [DPCMSG-1566] - restore-os hanging but NIM process successfully finished [DPCMSG-1609] - too many lpar_netboot commands to sort out correct netboot-adapter before OS-Install and Restore-OS [DPCMSG-1651] - too many temporary firmware boots [DPCMSG-1474] - Change Profile Name: Virtual Profile remains as artifact [DPCMSG-1479] - LPAR Actions are not locked while global actions (LPM/Recreate) [DPCMSG-1481] - Missing some VSCSI LPAR Details + VFCHOST VIO Details [DPCMSG-1482] - Missing VSCSI Performance Graphs in Performance Details and Analysis (LPAR/VIO) [DPCMSG-1483] - Global Recreate failed because of wrong profile inventory [DPCMSG-1485] - Clone LPAR profile fails for change adapter associations [DPCMSG-1486] - Saved changes won't be deployed correctly while profile clone [DPCMSG-1487] - Waiting for adapters/LPAR to be visible in inventory takes too much time [DPCMSG-1488] - Global LPM has no docket selection [DPCMSG-1489] - Change Profile has no docket selection [DPCMSG-1507] - issue with LPM [DPCMSG-1509] - Error on creating NPIV-Mapping Missing nportDeviceName [DPCMSG-1519] - Lpar Id Reuse with fast deployment [DPCMSG-1544] - Editing user requires mail address [DPCMSG-1570] - Global Recreate VSCSI + NPIV Failing [DPCMSG-1571] - missing flag description for running docket [DPCMSG-1577] - Deleting aliases in SAN-Storage Configuration [DPCMSG-1578] - Misbehavior of showing EC values in Pool-Selection of Create new VM [DPCMSG-1584] - Slot-IDs of server adapters already deleted are not usable anymore [DPCMSG-1586] - coreNodeCmd createNpivMapping fails with error of missing nportDeviceName [DPCMSG-1596] - Deploy LPAR Profiles Error [DPCMSG-1601] - VM Change and verify Client Connection error [DPCMSG-1616] - unable to create AIX Node [DPCMSG-1618] - missing Image-Data and (NIM-)Script objects in UI NIM resource overview [DPCMSG-1619] - wrong adapter inventory for LPAR and VIOS shown in UI after successfully LPAR Creation and after finished OS-Installation [DPCMSG-1620] - missing verification of PVs for VSCSI-Mappings whether those are available on partner-VIO [DPCMSG-1621] - Why option to cleanup orphaned VIO adapters is shown for deletion of already deleted LPARs which are missing already [DPCMSG-1622] - missing hint if default mksysb name in backup settings is too long [DPCMSG-1623] - unclear, missing, wrong Gateway and Ping Test for LPAR Netboot options of NimNode [DPCMSG-1625] - Profile Deploy: Fails with "Cannot read properties..." if inventory is not finished [DPCMSG-1627] - Global LPM does not work with multiple LPAR selections [DPCMSG-1628] - filter of function dialogs not supporting searching by tags [DPCMSG-1629] - missing UI precheck of name for master image to create [DPCMSG-1632] - Linking LPARs does not work with successfully completed deployment of cloned profile [DPCMSG-1633] - global Recreate has failed with error 'Cannot read properties of undefined' of lparId [DPCMSG-1634] - second try of global recreate has failed with submitting error [DPCMSG-1636] - LPARs not in State Running could be cloned using Global Recreate [DPCMSG-1638] - schedule of backup group will be interrupted after each execution [DPCMSG-1640] - Global Recreate Errro with VSCSI + NPIV [DPCMSG-1641] - Profile Deploy: Pre/Post Dockets not available [DPCMSG-1642] - OS Install: Script Name and ImageDataName not provided [DPCMSG-1644] - Profile Deploy: Wrong PID (lparId) used for command [DPCMSG-1645] - Backup Group with Schedule is switching to an interruption state shown as yellow after each backup run [DPCMSG-1648] - AppNode does not handovered parameter of lparIpAddr correctly to execute corenode commands to create AIX/LINUX/VIO backups [DPCMSG-1650] - Linux Config Node: HANA memory limit cannot be set to 0 [DPCMSG-1652] - Extremely high CPU load on NIM servers [DPCMSG-1653] - Single Backup has Timestamp Issue [DPCMSG-1655] - Error on creating LPAR profile: Error on running system basic inventory [DPCMSG-1658] - Global Recreate Set tags on some LPARs Recreate issue [DPCMSG-1674] - Unable to delete LPAR [DPCMSG-1681] - VIO restore not possible [DPCMSG-1472] - Profile Deploy: LPAR Linking sometimes not stored [DPCMSG-1475] - Global Recreate only working for LPARs in Running State [DPCMSG-1518] - Global Recreate: Non operating Source System [DPCMSG-1526] - Backup Command Destructuring Security [DPCMSG-1664] - Mksysbs created with DPCM must be not automatically associated to any AIX OS-Group [DPCMSG-1665] - Not all resources chosen in a AIX OS-Group are available by selection of this OS-Group in AIX Installation dialog to create a new vm or install an existing LPAR [DPCMSG-1669] - Show Bulk Function Button for NIM Resources [DPCMSG-1672] - Only assign Master Images to OS-Groups ------------------------------------------------------------------------------------ DPCM X 10.4.2 (GA: 27.07.2023) ===================== Changes/Enhancements: [DPCMSG-1491] - Change/Deploy Profile: Improve Name Validations [DPCMSG-1499] - reduce timeout for checking AIX/VIO install/restore Fix: [DPCMSG-1468] - Adjust the width of the Columns [DPCMSG-1463] - Delete Vm Dialog Resets values automatically [DPCMSG-1501] - LINUX installation fails because of wrong gateway selection [DPCMSG-1480] - LPAR delete options are falling back automatically [DPCMSG-1494] - PV Selection: Only show PVs with fully visible mappings [DPCMSG-1498] - missing network informations in dpcmSysbInfo in case of undefined network-gateway ------------------------------------------------------------------------------------ DPCM X 10.4.1 (GA: 24.07.2023) ===================== Fix: [DPCMSG-1490] - Error on parsing RAW-NIM-Objects / Attributes ------------------------------------------------------------------------------------ DPCM X 10.4.0 (GA: 21.07.2023) ===================== Changes/Enhancements: [DPCMSG-1145] - Virtual Profile Management: Clone CurrentConfiguration [DPCMSG-1158] - Create new LPAR with AIX Install [DPCMSG-1159] - Create new LPAR with Linux Install [DPCMSG-1174] - Change LPAR Current-Configuration [DPCMSG-1175] - Change LPAR Profile [DPCMSG-1153] - Profile Management - Rename LPAR / Profile [DPCMSG-1347] - AppNode Change CurrCfg / Real Profile [DPCMSG-1425] - Profile Deploy: Store VSCSI mapping infos at clone [DPCMSG-1150] - Profile Management - global recreate [DPCMSG-1149] - Profile Management - handling of linked LPARs [DPCMSG-1111] - Linked LPARs [DPCMSG-1183] - Create additional LPAR Profile [DPCMSG-1449] - Profiles of missing VM should be set to virtual [DPCMSG-1212] - AppNode Create VM: Create Profile - Reserve Resources [DPCMSG-1151] - Profile Management - LPAR-Delete [DPCMSG-1143] - LPAR Delete: Cleanup orphaned VIO devices [DPCMSG-1152] - Profile Management - Profile-Delete [DPCMSG-1427] - VIO Delete: Do not show cleanup options [DPCMSG-1154] - LPAR: start [DPCMSG-1160] - LPAR: stop [DPCMSG-1161] - LPAR: restart [DPCMSG-1176] - simple LPM functionality [DPCMSG-1177] - global LPM [DPCMSG-1408] - missing RMC indicator [DPCMSG-1140] - VIO Nodes Refactoring [DPCMSG-1168] - Backup VIO [DPCMSG-1171] - Restore OS VIO [DPCMSG-1166] - Backup AIX [DPCMSG-1167] - Backup Linux [DPCMSG-1169] - Restore OS AIX [DPCMSG-1170] - Restore OS Linux [DPCMSG-1172] - Create Master Image from Mksysb (AIX/LINUX/VIO) [DPCMSG-1173] - Delete Mksysb (AIX/LINUX/VIO) [DPCMSG-1225] - Backup Groups [DPCMSG-1352] - Store Mksysb Info [DPCMSG-1231] - Group NIM Resources [DPCMSG-1201] - Appnode NIM Inventory Connection [DPCMSG-1239] - button verification to run ping check on corenode using managedNim to ping selected hostname of NIM-Client to verify whether IP-Address of NIM-Client is used already [DPCMSG-1240] - button verification to run ping check on corenode using managedNim to ping selected IP-Address for custom host selection to verify whether IP-Address is used already [DPCMSG-1437] - Avoid getting SysbInfo on new NIM inventory for running mksysb commands [DPCMSG-1421] - testing and bugfixing LINUX install, backup, restore, create-master and install from master for RHEL 8.6 - 9.2 and SLES 15.1 - 15.4 for VSCSI + NPIV [DPCMSG-1420] - refactoring create master and installation from master method for LINUX [DPCMSG-1409] - Example Dockets and ansible playbooks for SAN/Tape/Storage Modules [DPCMSG-1338] - Ansible python modules for SAN/Tape/Storage Modules [DPCMSG-1339] - CoreNode SAN storage, switch objects + inventoryService [DPCMSG-1410] - createSanZoning - example Dockets and Ansible playbooks [DPCMSG-1411] - createTapeZoning - example Dockets and Ansible playbooks [DPCMSG-1412] - createSvcHost - example Dockets and Ansible playbooks [DPCMSG-1413] - createSvcLun - example Dockets and Ansible playbooks [DPCMSG-1414] - deleteSanZoning - example Dockets and Ansible playbooks [DPCMSG-1415] - deleteSvcHost - example Dockets and Ansible playbooks [DPCMSG-1426] - Add isSvc and makeConnection properties on SanStorage [DPCMSG-1363] - SVC & Fabric Configuration [DPCMSG-1367] - Add/Change SanStorage Jumphost Settings + SanStorage CoreNode updates [DPCMSG-1230] - Create jumphost connection [DPCMSG-82] - Manual Inventory Run Actions [DPCMSG-989] - Client Dashboard: Add Clear Button [DPCMSG-998] - FLRT: Fetching via Client connection [DPCMSG-1278] - Broader browser support [DPCMSG-1279] - Instance Registration with backend connection [DPCMSG-1134] - StartTLS vs SSL for SMTP Service [DPCMSG-1193] - Config UI Tooltips [DPCMSG-1340] - Bootstrap5 Migration [DPCMSG-1428] - Show duration/elapsed time of dockets in Client Dashboard [DPCMSG-1435] - External Ansible testing Fix: [DPCMSG-1051] - Dockets: Prompt values clearing issue [DPCMSG-1229] - Docket Script Editor needs Internet connection [DPCMSG-1236] - Dockets: Number default values shown as invalid [DPCMSG-1399] - Avoid CoreNode Command injection by AppNode configuration properties [DPCMSG-1237] - error message not shown in process log and shown message misleading [DPCMSG-1438] - VFC and VSCSI Adapters of current-configuration will be ignored if remote_lpar_name is not available [DPCMSG-1446] - Running Dockets fail when SSh connection to Ansible container can't be established on first try ------------------------------------------------------------------------------------ DPCM X 10.3.4 (GA: 31.03.2023) ===================== Changes/Enhancements: [DPCMSG-1076] - Virtual Profile Management: Change Profile - VFC Adapters [DPCMSG-1102] - add options to filter getLparInv by profileName and/or currProfileName and/or defaultProfileName [DPCMSG-1110] - Change restart-policy for docker containers of current (prod) DPCM X version to 'unless-stopped' [DPCMSG-1103] - AppNode: No setup after core node re-connects Fix: [DPCMSG-1101] - createLparFromInv fails in case system is NOT activeMemExpansionCapable [DPCMSG-1104] - createLparFromInv fails in case remoteSlotNumbers and/or vtdNames are not used initially, but while deployment process [DPCMSG-1100] - DPCM X 10.3 restarting Core/AppNode requires restart using stop/start-script [DPCMSG-1096] - DPCM X 10.3.0 on amd64 enough free capacity, required: 2 GB (2095 MB), available: 27 GB (28108 MB) [DPCMSG-1107] - When adding a VMC that is already known, InvDone messages aren't sent [DPCMSG-1090] - adding/changing/deleting veth adapter in virtual profile does not work [DPCMSG-1091] - adding/changing/deleting vfc adapter in virtual profile does not work [DPCMSG-1093] - deployment of profile does not work [DPCMSG-1099] - DPCM X 10.3 UI not automatically refreshing [DPCMSG-1097] - missing default capabilities for admin-role to clone/change/deploy profiles [DPCMSG-1105] - CoreNode crashes in case of VIOS shutdown or reboot [DPCMSG-1077] - Adjust path to systemctl ------------------------------------------------------------------------------------ DPCM X 10.3.0 (GA: 30.01.2023) ===================== Changes/Enhancements: [DPCMSG-1059] - Virtual Profile Management: Deploy Command [DPCMSG-1148] - Profile Management - VSCSI handling [DPCMSG-185] - Lpar Profile List with Current Configuration [DPCMSG-1092] - error message "profile name already taken" also in case of selection of a different system does not allow to clone a profile [DPCMSG-1058] - Missing MAC address of physical profiles [DPCMSG-725] - CoreNodeCmd - createVscsiAdapter (Create/Deployment) [DPCMSG-727] - CoreNodeCmd - createVscsiMapping (Create/Deployment) [DPCMSG-728] - CoreNodeCmd - createVfcAdapter (Create/Deployment) [DPCMSG-729] - CoreNodeCmd - createNpivMapping (Create/Deployment) [DPCMSG-744] - CoreNodeCmd - createNpivMapping (Recreate) [DPCMSG-742] - CoreNodeCmd - createVscsiMapping (Recreate) [DPCMSG-740] - CoreNodeCmd - createVscsiAdapter (Recreate) [DPCMSG-739] - CoreNodeCmd - createVethAdapter (Recreate) [DPCMSG-738] - CoreNodeCmd - createLparProfile (Recreate) [DPCMSG-743] - CoreNodeCmd - createVfcAdapter (Recreate) [DPCMSG-756] - CoreNodeCmd - deleteNpivMapping (LPAR Delete) [DPCMSG-755] - CoreNodeCmd - deleteVfcAdapter (LPAR Delete) [DPCMSG-754] - CoreNodeCmd - deleteVscsiMapping (LPAR Delete) [DPCMSG-752] - CoreNodeCmd - deleteVscsiAdapter (LPAR Delete) [DPCMSG-751] - CoreNodeCmd - deleteVethAdapter (LPAR Delete) [DPCMSG-1072] - CoreNodeCmd - createAddlLparProfile (Create/Deployment) [DPCMSG-750] - CoreNodeCmd - deleteLparProfile (Profile Delete) [DPCMSG-942] - CoreNodeCmd - deleteLpar (LPAR Delete) [DPCMSG-724] - CoreNodeCmd - createVethAdapter (Create/Deployment) [DPCMSG-723] - CoreNodeCmd - createLparProfile (Create/Deployment) [DPCMSG-341] - Mail templates for user setup [DPCMSG-1030] - DPCM X install script should check disk space [DPCMSG-1065] - Rename Storage Group to NPORT Group [DPCMSG-1026] - show CPU-Mode differences of current configuration and last activated (running) LPAR-Profile in LPAR Load Advisor [DPCMSG-1048] - Reports with FLRT [DPCMSG-1080] - LPAR Load Advisor: Improve export columns [DPCMSG-1046] - Add new POWER10 systems to powerSystemsLookup.json [DPCMSG-1045] - Move System Name resolution to GraphQL [DPCMSG-1050] - Plain VMs/Systems queries should not return missing items [DPCMSG-1049] - Dockets: Add some sub-menus or filter templates [DPCMSG-1052] - VIO Sizing Advisor for non-SAP environments [DPCMSG-420] - Add optional user:password authentication for proxy connection [DPCMSG-1023] - show additional LPAR profile settings in details of corresponding LPAR Profile [DPCMSG-988] - Storage Overview: Show all Hdisks [DPCMSG-1024] - highlight any differences of current configuration and last activated (running) LPAR-Profile setting [DPCMSG-1063] - FLRT: Show warning if no system has an mcode at manual update [DPCMSG-1029] - Adjust extended logfile settings Fix: [DPCMSG-1047] - Admin Settings shows error for service connection although connections works [DPCMSG-1069] - Storage Overview: Disable actions for UNKNOWN storage types [DPCMSG-415] - do not overwrite properties of profiles and associate properties by current configuration [DPCMSG-1074] - Numbers not working for filter in embedded tables [DPCMSG-1078] - Always calculate System CPU & Memory [DPCMSG-1084] - dpcm_r1.json.template does not exist in installation [DPCMSG-1008] - grouped dockets will not shown fully if the window is to small [DPCMSG-1088] - standard filter options are not working anymore [DPCMSG-1033] - AppNode Language pinned to German [DPCMSG-1039] - NGINX certs have wrong permissions [DPCMSG-1040] - Ansible: Always update CA certificates [DPCMSG-1038] - Deleting missing VMs fails [DPCMSG-1037] - Ansible: R1 config file becomes directory [DPCMSG-1064] - No Storage VirtualProductData for NetApp [DPCMSG-1002] - Edit Network , cannot Re-add more VLAN for this network [DPCMSG-975] - refactored extractData function is missing some hmc header does not match value filters ------------------------------------------------------------------------------------ DPCM X 10.2.0 (GA: 23.11.2022) ===================== Changes/Enhancements: [DPCMSG-81] - Introduced VIO Sizing Advisor, gives recommendations for Desired EC / CPUs / Memory based on inventory data of the VIO (AppNode/UI) [DPCMSG-346] - Introduced pdf report generation with configurable contents (Appnode/UI) [DPCMSG-600] - Added performance graphs for VSCSI / VFC(NPIV) / SR-IOV to performance tab of VM details (AppNode/UI) [DPCMSG-700] - Introduced FLRT Tool, shows detailed information for current version and recommended updates/upgrades for Systems/HMCs/VIOs/AIX (including APARs) (AppNode/UI) [DPCMSG-922] - Added showing uptime of a system in the overview tab of its details (based on REST API data) (AppNode/UI) [DPCMSG-923] - It is no longer necessary to disable IPv6 on the docker host (Docker) [DPCMSG-926] - For PVs of a Storage System in Storage Overview, show column with number of VIOs/mappings for each PV (UI) [DPCMSG-931] - Moved REST API sessions to separate tab, improved error messages (AppNode/UI) [DPCMSG-933] - Splitted VM Change (Capacity / Connection) buttons, fixes connection btn missing if capacity capability was disabled (UI) [DPCMSG-935] - Package & Image Upgrades, Major refactoring of HTTP and GraphQL components (also fixes ActiveDirectory logins that previously failed with ECONNRESET) (AppNode) [DPCMSG-937] - Fixed sporadic Docket failures with “Temporary failure in name resolution” despite Host is reachable (AppNode) [DPCMSG-955] - In workflow dockets, other workflow dockets now can be selected as sequence steps, added cycle detection (Appnode/UI) [DPCMSG-977] - Added session duration parameter to HMC configuration (additionally, "Inaktivitätszeitlimit in Minuten" should be set on REST API user in HMC UI) (Core/AppNode/UI) [DPCMSG-986] - Added Enable/Disable for dockets, also available as bulk function (AppNode/UI) [DPCMSG-991] - Added missing modules and dockets to create and install SAP Hana LPARs based on VSCSI with different Volume-Group and Filesystem Layout-Options (Ansible) [DPCMSG-992] - Improved Miniperf handling (lower CPU & Memory usage) for environments with lots of storage adapters (AppNode/UI) [DPCMSG-995] - Added required ssh options for dpcm-shellinabox to avoid connection issues by HMC changes, like SSH key exchange (Docker) [DPCMSG-996] - Added additional and updated modules and dockets for DPCM R1 collection of DPCM X 10.2 (Ansible) [DPCMSG-1007] - Updated dockets of DPCM R1 collection dependent of grouping feature, including updating scope (Ansible) Fix: [DPCMSG-925] - In environments with internal Root CAs, intermediate certificates dropped to extracerts folder will now correctly work (Docker) [DPCMSG-934] - Fixed handling of default combiner in Docket Item Target Scope (AppNode) [DPCMSG-936] - Fixed not scanning some VioDevType's in lparInventory, fixes VETH VLANs, System mcodes and Storage System Disk Paths not showing (Core/AppNode) [DPCMSG-953] - Fixed finished Dockets being stucked in "Postprocessing" step (AppNode) [DPCMSG-973] - Fixed a possible error in Cold Standby setups not copying traefik config at rsync (Docker) [DPCMSG-990] - Fixed module issues, to support environments with managed_system are not AME capable (Ansible) [DPCMSG-994] - Fixed Docket debug output in AppNode log to be directly executable without modifications (AppNode) ------------------------------------------------------------------------------------ DPCM X 10.1.0 (GA 28.07.2022) ===================== Changes/Enhancements: [DPCMSG-426] - shellinabox with stylesheet [DPCMSG-451] - LPARs "IOR Collection LP" should not be shown in DPCM X virtual server view [DPCMSG-524] - Store more currentConfiguration data in influx db [DPCMSG-556] - System-Memory-aggregation-Graph schema query [DPCMSG-596] - LPAR2RRD-Graph Replacements in Details [DPCMSG-597] - LPAR2RRD-Replacement: System-Memory-Aggregation-Graph [DPCMSG-604] - LPAR2RRD-Graph Replacements: Selectable Timeframe in Detail-Graphs [DPCMSG-211] - Add reload button to Load Advisor [DPCMSG-226] - Display of docket/command event details [DPCMSG-285] - Improve System Logos in Systems Overview [DPCMSG-421] - Add clone for HmcNode resource [DPCMSG-422] - Add info about "Remote Web Access" to REST API HmcNode config [DPCMSG-424] - Better visualisation/distinction of placeholders in input fields [DPCMSG-441] - Docket settings to show in details [DPCMSG-442] - Connection-Template settings to show in details [DPCMSG-443] - SanStorage settings to show in details [DPCMSG-444] - SanSwitch settings to show in details [DPCMSG-445] - NIM settings to show in details [DPCMSG-446] - DataCenter settings to show in details [DPCMSG-453] - Implementation Operational Docket to delete "missing" LPARs [DPCMSG-560] - Refactor backend to get rid of transpilation [DPCMSG-564] - Enhance vms/vios query with systemName&name [DPCMSG-589] - Authentication Settings: Logging, Group assignment [DPCMSG-605] - VM Bulk Assign with better change checkmark [DPCMSG-628] - Check logging of protectedFields in Docket Commands [DPCMSG-629] - Error in a specific docket call not displayed [DPCMSG-630] - Python Module and Docket to change settings of Global-Mksysb-Task [DPCMSG-631] - Python Module and Docket to change LPAR options [DPCMSG-632] - Python Module and Docket to delete missing system [DPCMSG-633] - Python Module and Docket to change settings of LPAR-Mksysb-Schedule [DPCMSG-634] - Python Module and Docket to assign user to LPAR [DPCMSG-635] - Python Module and Docket to remove user from LPAR [DPCMSG-647] - Enhance REST API session information [DPCMSG-648] - example docket and playbook to add NPIV adapters and SAN-LUNs for easy migration from VSCSI to NPIV [DPCMSG-667] - LPAR Load Advisor takes a long time to load [DPCMSG-406] - missing system status indication in case of VIO connection has been lost [DPCMSG-537] - Update Docker Registry credentials for Jenkins in Git [DPCMSG-547] - Increase connection limit on internal ansible container sshd service [DPCMSG-551] - Adjust sshd config settings in VIOMgr container [DPCMSG-609] - Changing types of storage systems shown in storage view [DPCMSG-348] - refactoring HdiskVpdInfo [DPCMSG-355] - Ansible Collections DPCM X Python Plugins [DPCMSG-357] - Ansible Collection R1 Python Plugins [DPCMSG-359] - implementation fine granular Python Plugins for Ansible Collection R1 [DPCMSG-360] - implementation example dockets for fine granular Python Plugins of Ansible Collection R1 [DPCMSG-368] - Storage Overview [DPCMSG-373] - Load-Advisor recommendations [DPCMSG-379] - Spec Perf-Graph Details and options [DPCMSG-380] - missing objects below LPAR won't be shown in LPAR details [DPCMSG-381] - review LPAR and VIO details [DPCMSG-383] - UI container component to display multiple configurable graphs [DPCMSG-393] - Client Network Overview [DPCMSG-425] - Specification fine granular Python Plugins for Ansible Collection R1 [DPCMSG-504] - Python Module to delete missing LPARs in DPCM X [DPCMSG-511] - Graph-Sub-Component LPAR-CPU-Graph [DPCMSG-512] - Graph-Sub-Component LPAR-Memory-Graph [DPCMSG-522] - Implement Ansible Collection R1 config [DPCMSG-525] - implementation example playbooks for fine granular Python Plugins of Ansible Collection R1 [DPCMSG-455] - implementation Python Plugins for Add PV, Change PV, Delete PV Mappings [DPCMSG-456] - implementation Python Plugins for CREATE LPAR AIX NPIV WITHOUT INSTALL [DPCMSG-457] - implementation Python Plugins for CREATE LPAR HANA NPIV WITHOUT INSTALL [DPCMSG-458] - implementation Python Plugins for CREATE LPAR LINUX NPIV WITHOUT INSTALL [DPCMSG-459] - implementation Python Plugins for CREATE LPAR VSCSI AIX INSTALL [DPCMSG-460] - implementation Python Plugins for CREATE LPAR VSCSI AIX INSTALL WITH UPDATE [DPCMSG-461] - implementation Python Plugins for CREATE LPAR VSCSI LINUX INSTALL [DPCMSG-462] - implementation Python Plugins for CREATE LPAR VSCSI NPIV ADDL DISK VLAN LINUX INSTALL [DPCMSG-463] - implementation Python Plugins for CREATE LPAR VSCSI NPIV ADDL VLAN AIX MIRRORED INSTALL [DPCMSG-464] - implementation Python Plugins for CHANGE LPAR AIX INSTALL [DPCMSG-465] - implementation Python Plugins for CHANGE LPAR FOR ALT-DISK-COPY WITH TL-UPDATE [DPCMSG-466] - implementation Python Plugins for CHANGE LPAR FOR ALT-DISK-COPY WITHOUT TL-UPDATE [DPCMSG-467] - implementation Python Plugins for CHANGE LPAR FOR MIGRATION [DPCMSG-468] - implementation Python Plugins for CHANGE LPAR FOR NIMADM [DPCMSG-469] - implementation Python Plugins for CHANGE LPAR HANA INSTALL [DPCMSG-470] - implementation Python Plugins for CHANGE LPAR LINUX INSTALL [DPCMSG-471] - implementation Python Plugins for CHANGE LPAR TO ADD NPIV ADAPTERS [DPCMSG-472] - implementation Python Plugins for CHANGE LPAR TO ADD VLAN [DPCMSG-473] - implementation Python Plugins for CHANGE LPAR TO CHANGE EC CPU [DPCMSG-474] - implementation Python Plugins for CHANGE LPAR TO CHANGE MEM AME [DPCMSG-475] - implementation Python Plugins for CHANGE LPAR TO CHANGE PROC POOL [DPCMSG-476] - implementation Python Plugins for CHANGE LPAR TO INSTALL SW [DPCMSG-477] - implementation Python Plugins for CHANGE LPAR TO VALIDATE UPDATE SW [DPCMSG-478] - implementation Python Plugins for Create Mksysb [DPCMSG-479] - implementation Python Plugins for Hosts Functions [DPCMSG-480] - implementation Python Plugins for Inventory Tasks and Global Mksysb [DPCMSG-481] - implementation Python Plugins for LPAR Delete [DPCMSG-482] - implementation Python Plugins for LPAR Rename [DPCMSG-483] - implementation Python Plugins for LPAR Start, Stop, Restart [DPCMSG-484] - implementation Python Plugins for LPM [DPCMSG-485] - implementation Python Plugins for NIM-Mksysb Functions [DPCMSG-486] - implementation Python Plugins for Recreate Functions [DPCMSG-487] - implementation Python Plugins for Restore OS [DPCMSG-488] - implementation Python Plugins for release-unused-pvs + rescan-san [DPCMSG-506] - implementation Python Plugin for free unused hosts [DPCMSG-507] - implementation Python Plugin to delete a missing lpar [DPCMSG-508] - implementation Python Plugin to delete all missing lpars [DPCMSG-513] - implementation Python Plugins for change VMC [DPCMSG-514] - implementation Python Plugins for change VLAN [DPCMSG-515] - implementation Python Plugins for DPCM R1 Storage Functionalities [DPCMSG-516] - implementation Python Plugins for OS and SW-Pkg Functions [DPCMSG-517] - implementation Python Lookup Functions for Backup Results [DPCMSG-518] - implementation Python Modules for Proc Pool Functions [DPCMSG-519] - implementation Python Modules for User Functions [DPCMSG-520] - implementation Python Modules for Change Defaults [DPCMSG-521] - implementation Python Modules for Global LPM and Global Recreate [DPCMSG-523] - Implement selection R1 instance for Ansible Collection R1 [DPCMSG-526] - implementation example playbooks for Restore OS modules [DPCMSG-534] - implementation example playbooks for LPAR Deployment with CSSP LU Create [DPCMSG-538] - refactoring DPCM X install/update script [DPCMSG-615] - archive JSON file for example dockets as artifact while jenkins build job [DPCMSG-616] - refactoring ansible python modules to handle JAVA command returns correctly [DPCMSG-636] - getUserBaseInfo enhancement to align user domain [DPCMSG-394] - Add SR-IOV [DPCMSG-395] - Add LPARs to Network info [DPCMSG-397] - Adjust LPAR stats query (percentile EC etc.) [DPCMSG-398] - Add System/Pool stat queries (percentile EC) [DPCMSG-399] - Refactor UI to display suggestions better [DPCMSG-419] - Add VIOMGR image to Jenkins build pipeline [DPCMSG-437] - Refactor ManagedVio to use sshConnectionDetailService [DPCMSG-449] - Add port to Connection Templates [DPCMSG-450] - sshOptions of LPAR connections should be a sub-object in appnode [DPCMSG-489] - add validate parameter as option for Change Python Plugins [DPCMSG-502] - Sample config for R1 Ansible Collection [DPCMSG-557] - System-CPU-aggregation-Graph query enhancement [DPCMSG-558] - LPAR Aggregation Graph influx/schema query [DPCMSG-575] - Make bind mounts WSL2 compatible [DPCMSG-581] - Update Docker images [DPCMSG-582] - Update NPM Packages [DPCMSG-593] - VM Detail Tab "VSCSI" shows incorrect entries [DPCMSG-594] - VM Detail Tab "VSCSI" not showing mapping-less adapters Fix: [DPCMSG-188] - Creating a new Docket sequence always creates an empty Playbook Docket [DPCMSG-189] - New steps added to a Docket sequence don't get executed [DPCMSG-190] - Top level Steps in a Docket Sequence set to onSuccess or onFailure never get executed [DPCMSG-201] - LPARs get shown in DataCenters with VIO filters that are associated with a different VIO or none [DPCMSG-400] - Firmware and CPU ID not shown if VIO connection has been lost [DPCMSG-401] - App Node Not Reachable in Admin Client [DPCMSG-402] - VIO connection from UI not used for ssh [DPCMSG-403] - after bulk deletion of 89 missing LPARs a browser refresh was necessary [DPCMSG-404] - filter in edit datacenter will be reset specific selected connection templates for vios [DPCMSG-405] - missing exclamation mark for yellow box in case of VIO connection has been lost [DPCMSG-407] - Storage Group and Fabric not shown in details of LPAR profile [DPCMSG-408] - Proc pool delete does not reset form state [DPCMSG-411] - missing adapters and mappings shown in LPAR details, but should be not shown [DPCMSG-412] - replace fields storage-group and fabric from VSCSI LPAR-Details with storage-id and storage-type from spec storage overview [DPCMSG-413] - missing data for virtual profile, please check VSCSI, VFC and VETH too [DPCMSG-414] - missing VFCHOST(NPIV) Adapters for VIOS in LPAR and Profile Details [DPCMSG-416] - Missing and virtual profiles should not been updated by LPAR inventory and missing properties needs to be associated by current configuration [DPCMSG-417] - add network and subnet properties to VETH adapter of LPAR profiles [DPCMSG-423] - HMC REST API fails with < in username/password [DPCMSG-447] - action/command in proc-pool view does not allow to restore the system-detail-panel afterwards [DPCMSG-490] - GraphQL type of logicalPortId's must be string [DPCMSG-496] - progress bar won't be finished and status won't be refreshed for dockets [DPCMSG-509] - functionality of changing scope and filtering dockets by specific properties [DPCMSG-510] - functionality of button "Anfügen" for sequence dockets no clear [DPCMSG-540] - SMTP: DNS resolution doesn't use /etc/hosts [DPCMSG-541] - No VIO connectivity with specific rsafile [DPCMSG-542] - Frame Capacity showing full on SN780CEF0 [DPCMSG-544] - Error: Test DPCM X 10.1.0 Rollback Script issue [DPCMSG-546] - Virtual Server Profile tabs are missing [DPCMSG-548] - Uncaught exception at unexpected disconnect of SSH tunnel [DPCMSG-549] - API doesn't return Datacenter default connection template for VIOs [DPCMSG-550] - API doesn't return HMC connection settings [DPCMSG-555] - DPCM X stop not working on DPCM X 10.1.0 [DPCMSG-559] - Negative performance chart after switching to Dedicated [DPCMSG-573] - Make Ansible image tag more stable [DPCMSG-585] - AD Login fails with ECONNRESET [DPCMSG-588] - Test on MISSING not working [DPCMSG-591] - osVersion not updated by client for NIM server [DPCMSG-607] - System Performance Graphs are not available in IB_DPCM_X-10.1-Sprint5 [DPCMSG-608] - performance detail tab of virtual servers causing for an empty page in IB_DPCM_X-10.1-Sprint5 [DPCMSG-610] - UDID shown as associated to LPAR but without LPAR information, but UDID not mapped to any VHOST-adapter / LPAR [DPCMSG-611] - UDID shown with zero count of VIOS [DPCMSG-614] - strange shown association line for display memory in LPAR details [DPCMSG-619] - CSSP information not updating per REST API [DPCMSG-620] - vEth Graph draws null data [DPCMSG-621] - Search filter resets if editing a docket [DPCMSG-622] - Detail panel stucked in minimized mode [DPCMSG-627] - Missing VIOs showing up in System Details and leading to ATTENTION indicator [DPCMSG-637] - Startup has failed, because of NOT all containers started successfully (SUCCESS:13/12, FAILED:0) [DPCMSG-639] - LDAP is throwing error [DPCMSG-641] - CREATE AND MAP SVC LUNS (NPIV) , not able to allocate disk [DPCMSG-642] - R1 - AIX/LINUX LPAR DEPLOY EXAMPLE -failing [DPCMSG-643] - Directory Settings Debug Setting & Form Reload Password Problem [DPCMSG-644] - in some dockets param share_mode will be handovered in a wrong way [DPCMSG-646] - dockets are failing sporadic with error of Remote end closed connection without response [DPCMSG-655] - R1 - Create AIX VSCSI LPAR with install: Connection aborted.', RemoteDisconnected('Remote end closed connection without response'))" [DPCMSG-657] - Reload of API Pages leads to 404 [DPCMSG-666] - can't reach this page p81vm58.axians.de refused to connect. [DPCMSG-670] - Create AIX NPIV LPAR without install -Create error [DPCMSG-671] - Timer on Admin Dashboard does not update [DPCMSG-613] - unable to verify system, lpar, adapter analysis graphs because of missing entry points ------------------------------------------------------------------------------------