aboutsummaryrefslogtreecommitdiffstatshomepage
diff options
context:
space:
mode:
authorBenedikt Niedermayr <benedikt.niedermayr@siemens.com>2022-11-02 14:30:46 +0100
committerKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>2022-11-02 10:02:39 -0400
commit89aed3cd5cb951113b766cddd9c2df43cfbdafd5 (patch)
tree01edea5ecb86490a53775eded27100f2a5e43df5
parent3821e96a01d658e770074331b56cec88c169a418 (diff)
downloadlinux-mem-ctrl-89aed3cd5cb951113b766cddd9c2df43cfbdafd5.tar.gz
memory: omap-gpmc: wait pin additions
This patch introduces support for setting the wait-pin polarity as well as using the same wait-pin for different CS regions. The waitpin polarity can be configured via the WAITPIN<X>POLARITY bits in the GPMC_CONFIG register. This is currently not supported by the driver. This patch adds support for setting the required register bits with the "ti,wait-pin-polarity" dt-property. The wait-pin can also be shared between different CS regions for special usecases. Therefore GPMC must keep track of wait-pin allocations, so it knows that either GPMC itself or another driver has the ownership. Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com> Link: https://lore.kernel.org/r/20221102133047.1654449-2-benedikt.niedermayr@siemens.com Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-rw-r--r--drivers/memory/omap-gpmc.c122
-rw-r--r--include/linux/platform_data/gpmc-omap.h8
2 files changed, 117 insertions, 13 deletions
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 2351f2708da23..e427572712e2d 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -134,6 +134,7 @@
#define GPMC_CONFIG_DEV_SIZE 0x00000002
#define GPMC_CONFIG_DEV_TYPE 0x00000003
+#define GPMC_CONFIG_WAITPINPOLARITY(pin) (BIT(pin) << 8)
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
@@ -229,6 +230,12 @@ struct omap3_gpmc_regs {
struct gpmc_cs_config cs_context[GPMC_CS_NUM];
};
+struct gpmc_waitpin {
+ u32 pin;
+ u32 polarity;
+ struct gpio_desc *desc;
+};
+
struct gpmc_device {
struct device *dev;
int irq;
@@ -236,6 +243,7 @@ struct gpmc_device {
struct gpio_chip gpio_chip;
struct notifier_block nb;
struct omap3_gpmc_regs context;
+ struct gpmc_waitpin *waitpins;
int nirqs;
unsigned int is_suspended:1;
struct resource *data;
@@ -1035,6 +1043,62 @@ void gpmc_cs_free(int cs)
}
EXPORT_SYMBOL(gpmc_cs_free);
+static bool gpmc_is_valid_waitpin(u32 waitpin)
+{
+ return waitpin >= 0 && waitpin < gpmc_nr_waitpins;
+}
+
+static int gpmc_alloc_waitpin(struct gpmc_device *gpmc,
+ struct gpmc_settings *p)
+{
+ int ret;
+ struct gpmc_waitpin *waitpin;
+ struct gpio_desc *waitpin_desc;
+
+ if (!gpmc_is_valid_waitpin(p->wait_pin))
+ return -EINVAL;
+
+ waitpin = &gpmc->waitpins[p->wait_pin];
+
+ if (!waitpin->desc) {
+ /* Reserve the GPIO for wait pin usage.
+ * GPIO polarity doesn't matter here. Wait pin polarity
+ * is set in GPMC_CONFIG register.
+ */
+ waitpin_desc = gpiochip_request_own_desc(&gpmc->gpio_chip,
+ p->wait_pin, "WAITPIN",
+ GPIO_ACTIVE_HIGH,
+ GPIOD_IN);
+
+ ret = PTR_ERR(waitpin_desc);
+ if (IS_ERR(waitpin_desc) && ret != -EBUSY)
+ return ret;
+
+ /* New wait pin */
+ waitpin->desc = waitpin_desc;
+ waitpin->pin = p->wait_pin;
+ waitpin->polarity = p->wait_pin_polarity;
+ } else {
+ /* Shared wait pin */
+ if (p->wait_pin_polarity != waitpin->polarity ||
+ p->wait_pin != waitpin->pin) {
+ dev_err(gpmc->dev,
+ "shared-wait-pin: invalid configuration\n");
+ return -EINVAL;
+ }
+ dev_info(gpmc->dev, "shared wait-pin: %d\n", waitpin->pin);
+ }
+
+ return 0;
+}
+
+static void gpmc_free_waitpin(struct gpmc_device *gpmc,
+ int wait_pin)
+{
+ if (gpmc_is_valid_waitpin(wait_pin))
+ gpiochip_free_own_desc(gpmc->waitpins[wait_pin].desc);
+}
+
/**
* gpmc_configure - write request to configure gpmc
* @cmd: command type
@@ -1886,6 +1950,17 @@ int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1);
+ if (p->wait_pin_polarity != GPMC_WAITPINPOLARITY_INVALID) {
+ config1 = gpmc_read_reg(GPMC_CONFIG);
+
+ if (p->wait_pin_polarity == GPMC_WAITPINPOLARITY_ACTIVE_LOW)
+ config1 &= ~GPMC_CONFIG_WAITPINPOLARITY(p->wait_pin);
+ else if (p->wait_pin_polarity == GPMC_WAITPINPOLARITY_ACTIVE_HIGH)
+ config1 |= GPMC_CONFIG_WAITPINPOLARITY(p->wait_pin);
+
+ gpmc_write_reg(GPMC_CONFIG, config1);
+ }
+
return 0;
}
@@ -1975,7 +2050,25 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
__func__);
}
+ p->wait_pin = GPMC_WAITPIN_INVALID;
+ p->wait_pin_polarity = GPMC_WAITPINPOLARITY_INVALID;
+
if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) {
+ if (!gpmc_is_valid_waitpin(p->wait_pin)) {
+ pr_err("%s: Invalid wait-pin (%d)\n", __func__, p->wait_pin);
+ p->wait_pin = GPMC_WAITPIN_INVALID;
+ }
+
+ if (!of_property_read_u32(np, "ti,wait-pin-polarity",
+ &p->wait_pin_polarity)) {
+ if (p->wait_pin_polarity != GPMC_WAITPINPOLARITY_ACTIVE_HIGH &&
+ p->wait_pin_polarity != GPMC_WAITPINPOLARITY_ACTIVE_LOW) {
+ pr_err("%s: Invalid wait-pin-polarity (%d)\n",
+ __func__, p->wait_pin_polarity);
+ p->wait_pin_polarity = GPMC_WAITPINPOLARITY_INVALID;
+ }
+ }
+
p->wait_on_read = of_property_read_bool(np,
"gpmc,wait-on-read");
p->wait_on_write = of_property_read_bool(np,
@@ -2080,7 +2173,6 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
const char *name;
int ret, cs;
u32 val;
- struct gpio_desc *waitpin_desc = NULL;
struct gpmc_device *gpmc = platform_get_drvdata(pdev);
if (of_property_read_u32(child, "reg", &cs) < 0) {
@@ -2208,17 +2300,9 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
/* Reserve wait pin if it is required and valid */
if (gpmc_s.wait_on_read || gpmc_s.wait_on_write) {
- unsigned int wait_pin = gpmc_s.wait_pin;
-
- waitpin_desc = gpiochip_request_own_desc(&gpmc->gpio_chip,
- wait_pin, "WAITPIN",
- GPIO_ACTIVE_HIGH,
- GPIOD_IN);
- if (IS_ERR(waitpin_desc)) {
- dev_err(&pdev->dev, "invalid wait-pin: %d\n", wait_pin);
- ret = PTR_ERR(waitpin_desc);
+ ret = gpmc_alloc_waitpin(gpmc, &gpmc_s);
+ if (ret < 0)
goto err;
- }
}
gpmc_cs_show_timings(cs, "before gpmc_cs_program_settings");
@@ -2260,7 +2344,7 @@ err_child_fail:
ret = -ENODEV;
err_cs:
- gpiochip_free_own_desc(waitpin_desc);
+ gpmc_free_waitpin(gpmc, gpmc_s.wait_pin);
err:
gpmc_cs_free(cs);
@@ -2489,7 +2573,7 @@ static int omap_gpmc_context_notifier(struct notifier_block *nb,
static int gpmc_probe(struct platform_device *pdev)
{
- int rc;
+ int rc, i;
u32 l;
struct resource *res;
struct gpmc_device *gpmc;
@@ -2545,6 +2629,15 @@ static int gpmc_probe(struct platform_device *pdev)
gpmc_nr_waitpins = GPMC_NR_WAITPINS;
}
+ gpmc->waitpins = devm_kzalloc(&pdev->dev,
+ gpmc_nr_waitpins * sizeof(struct gpmc_waitpin),
+ GFP_KERNEL);
+ if (!gpmc->waitpins)
+ return -ENOMEM;
+
+ for (i = 0; i < gpmc_nr_waitpins; i++)
+ gpmc->waitpins[i].pin = GPMC_WAITPIN_INVALID;
+
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
@@ -2598,9 +2691,12 @@ gpio_init_failed:
static int gpmc_remove(struct platform_device *pdev)
{
+ int i;
struct gpmc_device *gpmc = platform_get_drvdata(pdev);
cpu_pm_unregister_notifier(&gpmc->nb);
+ for (i = 0; i < gpmc_nr_waitpins; i++)
+ gpmc_free_waitpin(gpmc, i);
gpmc_free_irq(gpmc);
gpmc_mem_exit();
pm_runtime_put_sync(&pdev->dev);
diff --git a/include/linux/platform_data/gpmc-omap.h b/include/linux/platform_data/gpmc-omap.h
index c9cc4e32435d4..296b080c5c678 100644
--- a/include/linux/platform_data/gpmc-omap.h
+++ b/include/linux/platform_data/gpmc-omap.h
@@ -136,6 +136,13 @@ struct gpmc_device_timings {
#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */
#define GPMC_MUX_AD 2 /* Addr-Data multiplex */
+/* Wait pin polarity values */
+#define GPMC_WAITPINPOLARITY_INVALID -1
+#define GPMC_WAITPINPOLARITY_ACTIVE_LOW 0
+#define GPMC_WAITPINPOLARITY_ACTIVE_HIGH 1
+
+#define GPMC_WAITPIN_INVALID -1
+
struct gpmc_settings {
bool burst_wrap; /* enables wrap bursting */
bool burst_read; /* enables read page/burst mode */
@@ -149,6 +156,7 @@ struct gpmc_settings {
u32 device_width; /* device bus width (8 or 16 bit) */
u32 mux_add_data; /* multiplex address & data */
u32 wait_pin; /* wait-pin to be used */
+ u32 wait_pin_polarity;
};
/* Data for each chip select */