Re: [MW:18583] Radiography acceptance criteria.

1,969 views
Skip to first unread message

Raghuram Bathula

unread,
Sep 5, 2013, 6:22:42 AM9/5/13
to Materials-Welding
Good effort Mr. Ghosh


On 5 September 2013 15:48, Pradip Ghosh <prad...@gmail.com> wrote:
Dear All,

I have prepared a excel program in which you can find Radiography acceptance criteria of ASME Sec IX,API-650,API-1104,ANSI B 31.3 and ASME Sec VII Div  in a click.
Please give me your review and comments.




Pradip Ghosh

QA/QC Engineer
Mott MacDonald (P) Ltd.

saroj kumar

unread,
Sep 5, 2013, 8:39:18 AM9/5/13
to material...@googlegroups.com
Dear Pradip,

It is really very nice in quickly accessing the acceptance criteria of defects for all the codes
and congrats for your wonderful effort..Keep it up..

Thanks/Best Regards,

M.Saroj Kumar
Saudi Arabia.


On Thu, Sep 5, 2013 at 1:18 PM, Pradip Ghosh <prad...@gmail.com> wrote:
Dear All,

I have prepared a excel program in which you can find Radiography acceptance criteria of ASME Sec IX,API-650,API-1104,ANSI B 31.3 and ASME Sec VII Div  in a click.
Please give me your review and comments.




Pradip Ghosh

QA/QC Engineer
Mott MacDonald (P) Ltd.

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

victor george

unread,
Sep 5, 2013, 7:01:03 AM9/5/13
to material...@googlegroups.com
Thanks Pradip for your effort, hopefully it will be very useful for all.
 
Best Regards,
DV.George

Sampath Kumar

unread,
Sep 5, 2013, 8:52:34 AM9/5/13
to material...@googlegroups.com
Mr.Pradip,
Very good begining in the cause of helping others especially freshers & new comers to this line.
CHEERS

meisam shokri arfaei

unread,
Sep 5, 2013, 9:34:25 AM9/5/13
to material...@googlegroups.com
Dear friend,
Very good job.
But I have an idea. The 2 options (defect & standard) will not completely sufficient. In some cases differences in production, qualification of welding procedures and qualification of welders will affect the acceptance range. 
If you could add the item, certainly your file will more helpful.

Best regards
M. Shokri Arfaei
ISA-ISTS - Metallurgy Lab. Manager
ASNT NDT Level III
International Welding Engineer





Ramesh Barot

unread,
Sep 6, 2013, 2:07:50 AM9/6/13
to material...@googlegroups.com
Dear Sir,
 
Very Nice efforts!
 
I have a suggestion regarding ASME B31.1 for different category fluids. please add it & AWS D 1.1, too. It may be very useful to all.
 
Thanks,
With Best Regards,
Ramesh Barot

suresh

unread,
Sep 6, 2013, 12:26:07 AM9/6/13
to material...@googlegroups.com
 
Dear Sir,
this is very good and use full to every one 
can you please include AWS D1.1(structural welding code of steel)

as one of our friend suggestion is valid "some cases differences in production, qualification of welding procedures and qualification of welders will affect the acceptance range".

Pradip Ghosh

unread,
Sep 6, 2013, 8:36:59 AM9/6/13
to material...@googlegroups.com
Dear Mr.M. Shokri Arfaei,

I will try to fulfill your requirement in  next version!



Thanks


Pradip Ghosh

QA/QC Engineer
Mott MacDonald Pvt. Ltd 

Rajesh Ramnath

unread,
Sep 6, 2013, 10:37:16 AM9/6/13
to material...@googlegroups.com, prad...@gmail.com
Pradip,
 
Execellent feedback and great technical assistance the kind we value so much on the network.



 
 
Regards,
Rajesh 
 

 








 
Date: Thu, 5 Sep 2013 03:18:52 -0700
From: prad...@gmail.com
To: material...@googlegroups.com

Subject: [MW:18583] Radiography acceptance criteria.

pasupala govindasamy Karunakaran

unread,
Sep 6, 2013, 8:09:09 AM9/6/13
to material...@googlegroups.com, Pradip Ghosh
Nice one.
 
Also include the Excesspenetration acceptance in all the codes for reference.
 
Regards,
 
PG.KAruna

Sent: Thursday, 5 September 2013 3:48 PM
Subject: [MW:18583] Radiography acceptance criteria.

mohamed maher

unread,
Sep 7, 2013, 6:04:12 AM9/7/13
to material...@googlegroups.com
Dear my friend , 
thanks for your great effort . You mentioned in API 1104 that cracks not permitted ,however star cracks in start/stop is permitted.
see below copy past clause from API 1104. 

9.3.10 Cracks
Cracks (C) shall be considered a defect should any of the
following conditions exists:
a. The crack, of any size or location in the weld, is not a shallow crater crack or star crack.
b. The crack is a shallow crater crack or star crack with a
length that exceeds 
5/32 in. (4 mm).
Note: Shallow crater cracks or star cracks are located at the stopping
point of weld beads and are the result of weld metal contractions
during solidification.
--
QA/QC Welding Inspector Engineer M.Maher

Steven Teo

unread,
Sep 7, 2013, 8:33:21 AM9/7/13
to material...@googlegroups.com
Do not follow any specs blindly that allowed crack regardless of size. Code/specs/rules are just a guide for academic novices. Nothing can beat "educated" field experiences and common sense. Nevertheless, like arc strike (that under microscope can actually see shrinkage cracks) should be removed and MPI.

To unsubscribe from this group, send email to mailto:materials-welding%2Bunsu...@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to mailto:materials-welding%2Bunsu...@googlegroups.com.
--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to mailto:materials-welding%2Bunsu...@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to mailto:materials-welding%2Bunsu...@googlegroups.com.



--
QA/QC Welding Inspector Engineer M.Maher
Message has been deleted

SULTAN

unread,
Nov 16, 2017, 10:45:20 PM11/16/17
to Materials & Welding
Very Nice effort  Mr.Goshi
i think one thing is missing in this is ASME Sec.I

Thanks,

Regard's
Sultan 
QC Engineer 
MEC Engineering

Shashank Vagal

unread,
Nov 17, 2017, 2:36:05 AM11/17/17
to material...@googlegroups.com
Dear Pradeep Ghosh,
Please fwd to me a copy of this excel program .
 
Thankfully Yours,
Shashank C Vagal  
301, PRATHAMESH, M G Rd – Mahant Rd, Vile Parle East, Mumbai 400 057 INDIA
Tel : +91 22 2611 6640 / (+91) 9821386292 /  8082395502 
 



---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.

Pradip Ghosh

unread,
Nov 17, 2017, 3:09:35 AM11/17/17
to material...@googlegroups.com
U can download it from group itself.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/k5wvDu0g8dU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com.

Astley Scott

unread,
Nov 17, 2017, 10:35:35 AM11/17/17
to material...@googlegroups.com

Pradip Ghosh


Should be a useful, time-saving tool. Could you please post the link?


Thanks


Astley D. Scott
From: material...@googlegroups.com <material...@googlegroups.com> on behalf of Pradip Ghosh <prad...@gmail.com>
Sent: Friday, November 17, 2017 3:07:34 AM
To: material...@googlegroups.com
Subject: Re: [MW:27001] Re: Radiography acceptance criteria.
 
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.

Pradip Ghosh

unread,
Nov 19, 2017, 2:01:10 AM11/19/17
to material...@googlegroups.com
 Dear ,Shashank C Vagal  use bellow link to download the file.

https://drive.google.com/open?id=0ByvRBXye0uymdW9aekp1M0J1cHc

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/k5wvDu0g8dU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com.



--
Thanks and Regards,

Engineer Inam-Ul-Haq

unread,
Nov 19, 2017, 5:17:45 AM11/19/17
to material...@googlegroups.com

Very Nice, Mr. Pradeep Ghosh



Sent: Sunday, November 19, 2017 11:59 AM
To: material...@googlegroups.com
Subject: Re: [MW:27011] Re: Radiography acceptance criteria.
 
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.

Dominic v.k.dominic

unread,
Nov 19, 2017, 6:06:08 AM11/19/17
to material...@googlegroups.com
​Dear Pradip,
Thank you for the excel table and your time.
Please note that API-1104 Some of defect/flaw contractors will accepted reference of your table.
The API-1104 code allowed the range of below defects/flaws,
Lack of fusion - up to 25mm in (300 mm) length of weld.
Lack of penetration - up to 25mm (300 mm) length of weld.
Undercut - up to 50mm (300 mm) length of weld.

Kindly refer the code and please take your account in next version.

Thanks,
Best Regards,

Dominic V.K.




On 19 November 2017 at 11:17, Engineer Inam-Ul-Haq <engrh...@hotmail.com> wrote:

Very Nice, Mr. Pradeep Ghosh



Sent: Sunday, November 19, 2017 11:59 AM

Subject: Re: [MW:27011] Re: Radiography acceptance criteria.
 Dear ,Shashank C Vagal  use bellow link to download the file.

https://drive.google.com/open?id=0ByvRBXye0uymdW9aekp1M0J1cHc

Pradip Ghosh

unread,
Nov 19, 2017, 12:09:00 PM11/19/17
to material...@googlegroups.com
Mr. Dominic,

Thanks for your feedback.I will add your  suggestion on next revision.

Ligade, Vivek

unread,
Nov 20, 2017, 12:31:05 AM11/20/17
to material...@googlegroups.com

Dear Pradip,

 

Please see if we can state “Year of Edition/Revision” in front  of each standard/code.

 

 

In case if code/standard gets revised , The user will be aware which edition was used during design of this excel sheet.

 

 

 

Regards,

Vivek

 

From: material...@googlegroups.com [mailto:material...@googlegroups.com] On Behalf Of Pradip Ghosh


Sent: Friday, November 17, 2017 1:38 PM
To: material...@googlegroups.com

Subject: Re: [MW:27001] Re: Radiography acceptance criteria.

 

U can download it from group itself.

 

To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/k5wvDu0g8dU/unsubscribe.

To unsubscribe from this group and all its topics, send an email to materials-weld...@googlegroups.com.

You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.

This e-mail and any attachment are confidential and may be privileged or otherwise protected from disclosure. It is solely intended for the person(s) named above. If you are not the intended recipient, any reading, use, disclosure, copying or distribution of all or parts of this e-mail or associated attachments is strictly prohibited. If you are not an intended recipient, please notify the sender immediately by replying to this message or by telephone and delete this e-mail and any attachments permanently from your system.

Pradip Ghosh

unread,
Nov 20, 2017, 2:29:53 AM11/20/17
to material...@googlegroups.com
Thanks for your feedback, I will try to add the same on next revision.


To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/k5wvDu0g8dU/unsubscribe.

To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.

This e-mail and any attachment are confidential and may be privileged or otherwise protected from disclosure. It is solely intended for the person(s) named above. If you are not the intended recipient, any reading, use, disclosure, copying or distribution of all or parts of this e-mail or associated attachments is strictly prohibited. If you are not an intended recipient, please notify the sender immediately by replying to this message or by telephone and delete this e-mail and any attachments permanently from your system.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/k5wvDu0g8dU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com.

NISARG KEDAR

unread,
Nov 20, 2017, 5:27:54 AM11/20/17
to material...@googlegroups.com
Thank you so much Pradeep Ji. It's really very helpful to us.

On Nov 20, 2017 12:59 PM, "Pradip Ghosh" <prad...@gmail.com> wrote:
Thanks for your feedback, I will try to add the same on next revision.

Tamizh Selvan

unread,
Nov 20, 2017, 6:21:32 AM11/20/17
to material...@googlegroups.com
Dear Pradip Ghosh ,

Good effort.keep it up.

Prepare the same for welding ( essential, non essential & supplementary essential variables ) of ASME SEC IX, API 1104, ASME B31.3 , AWS D1.1 etc.,


Virus-free. www.avast.com

With Warm Regards,

S.TAMIZH SELVAN,
Mobile: +91-9597370860 ( India )
          

On Sun, Nov 19, 2017 at 9:59 AM, Pradip Ghosh <prad...@gmail.com> wrote:
 Dear ,Shashank C Vagal  use bellow link to download the file.

https://drive.google.com/open?id=0ByvRBXye0uymdW9aekp1M0J1cHc

Amit Udavant

unread,
Nov 21, 2017, 3:00:29 AM11/21/17
to material...@googlegroups.com
Nice effort sir.
Can this sheet be referred for jobs as per sec VIII Div 1?

On 05-Sep-2013 3:50 PM, "Pradip Ghosh" <prad...@gmail.com> wrote:
Dear All,

I have prepared a excel program in which you can find Radiography acceptance criteria of ASME Sec IX,API-650,API-1104,ANSI B 31.3 and ASME Sec VII Div  in a click.
Please give me your review and comments.




Pradip Ghosh

QA/QC Engineer
Mott MacDonald (P) Ltd.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

Mansukh Satashiya

unread,
Nov 21, 2017, 7:17:05 AM11/21/17
to material...@googlegroups.com, prad...@gmail.com
Dear friend

Pradip Ghosh

Well done, Good effort very easy to remember without opening code

Very help full

Thank you very much



---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.



--
Regard's

Mansukh Satashiya
| ASNT NDT Level III RT UT MPT PT| Welding Inspector CSWIP 3.1 | Lead Auditor ISO 9001:2008
T +91   7227039190 | WhattsApp 9726371394
E satas...@yahoo.co.in;satas...@gmail.com

Mhaskar Aly

unread,
Nov 21, 2017, 7:17:14 AM11/21/17
to material...@googlegroups.com
Hi Pradeep,
Good job,
Kindly add two conditions Spot RT & Full RT..In ASME Sec VIII-1; as acceptance criteria are different.

Ali

Virus-free. www.avast.com

On Sun, Nov 19, 2017 at 10:59 AM, Pradip Ghosh <prad...@gmail.com> wrote:
 Dear ,Shashank C Vagal  use bellow link to download the file.

https://drive.google.com/open?id=0ByvRBXye0uymdW9aekp1M0J1cHc

ihsan

unread,
Jun 18, 2018, 1:54:38 AM6/18/18
to Materials & Welding
dear sir,
i need the excel program prepared by you. thanks and regards.
email id.
ihsan....@gmail.com

On Thursday, September 5, 2013 at 3:22:42 PM UTC+5, MW wrote:
Good effort Mr. Ghosh

manish

unread,
Jan 25, 2019, 6:38:14 AM1/25/19
to Materials & Welding


Dear Sir

pl send the Radiography acceptance criteria of ASME Sec IX,API-650,API-1104,ANSI B 31.3 and ASME Sec VII 


Regards
Manish Joshi
09214037257
Reply all
Reply to author
Forward
0 new messages