ROLLER SHADES
VERSATILITY. PRIVACY. PREMIUM LIGHT FILTRATION.
Our manual and motorized indoor and outdoor roller shades are handcrafted to provide versatility and privacy. From 10 percent openness to total blackout, our roller shades offer several levels of light filtration. The clean lines of our shades’ low-profile design provide a modern look without distracting from your customers’ décor.
Photos
Roller Shades colors
*Photos are only a representation of each color. Screen types can alter the true color of the product. Please refer to a real sample for true color.
1011 White (1% Openness)
1012 White Linen (1% Openness)
1013 White Pearl (1% Openness)
1014 Linen (1% Openness)
1015 Ebony (1% Openness)
1016 Brown Chocolate (1% Openness)
4816 Charcoal Bronze (1% Openness)
4826 Gray White (1% Openness)
5602 Beige White (1% Openness)
5605 Gray White (1% Openness)
1031 White (3% Openness)
1032 White Linen (3% Openness)
1033 White Pearl (3% Openness)
1034 Linen (3% Openness)
1035 Ebony (3% Openness)
1036 Brown Chocolate (3% Openness)
1051 White (5% Openness)
1052 White Linen (5% Openness)
1053 White Pearl (5% Openness)
1054 Linen (5% Openness)
1055 Ebony (5% Openness)
1056 Brown Chocolate (5% Openness)
1057 Taupe (5% Openness)
2002 Beige White (5% Openness)
2005 Gray White (5% Openness)
2211 Charcoal Bronze (5% Openness)
2212 Charcoal Gray (5% Openness)
2213 Charcoal (5% Openness)
4201 Off White (8% Openness)
4202 Beige White (8% Openness)
4205 Gray White (8% Openness)
4211 Charcoal Bronze (8% Openness)
4212 Charcoal Gray (8% Openness)
4213 Charcoal (8% Openness)
4221 Gray Check (8% Openness)
4222 Beige (8% Openness)
4223 Multi (8% Openness)
1001 Spirit (Blackout)
1002 Loft (Blackout)
1003 Starfish (Blackout)
1004 Dune (Blackout)
1005 Odyssey (Blackout)
1006 Midnight (Blackout)
Buffalo (Blackout)
9201 Pure White (Blackout)
9202 Milky (Blackout)
9204 Sand (Blackout)
9205 Rock (Blackout)
9207 Marine (Blackout)
White (Silver Backed)
White Gray (Silver Backed)
Charcoal Bronze (Silver Backed)
Charcoal Gray (Silver Backed)
Beige White (Silver Backed)
Dark Gray White (Silver Backed)
5000 China White (Translucent)
5001 Ivory (Translucent)
5002 Ecru (Translucent)
5005 Raven (Translucent)
Sand (Translucent)
7001 Frost (Translucent)
7002 Eggshell (Translucent)
7003 French Vanilla (Translucent)
7004 Buff (Translucent)
7005 Earl Gray (Translucent)
7006 Onyx (Translucent)
Jet (Translucent)
Biscuit (Translucent)
4801 Off White (1% Openness)
4802 Beige White (1% Openness)
4805 Beige (1% Openness)
P2211 Charcoal Bronze (3% Openness)
P2212 Charcoal Grey (3% Openness)
P2213 Charcoal (3% Openness)
2001 Off White (5% Openness)
C-Series 3.75” Fascia Manual RS
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from POM. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 3 3/4”x 1 9/16” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Back Fascia | Square front and back, 3 3/4”x1/2” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. Optional |
| Ceiling Mount Bracket | 2 3/4” x 3 11/16” x 1 1/8”, Zinc plated, cold rolled steel ASTM A1008. |
| Wall Mount Bracket | 3 1/32” x 3 7/32” x 1 1/8”, Zinc plated, cold rolled steel ASTM A1008. |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, used at manufacturers discretion. Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel |
| Fascia End Cap | ABS, square. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-Carbonite. Shall comply with all safety requirements. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 156" | 18" | 240" |
| Clutch Left or Right Spring Assist | 36" | 156" | 18" | 240" |
C-Series 3.75” Fascia Motorized RS
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings and limit switches. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 3 3/4”x 1 9/16” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Back Fascia | Square front and back, 3 3/4”x1/2” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. Optional |
| Ceiling Mount Bracket | 2 3/4” x 3 11/16” x 1 1/8”, Zinc plated, cold rolled steel ASTM A1008. |
| Wall Mount Bracket | 3 1/32” x 3 7/32” x 1 1/8”, Zinc plated, cold rolled steel ASTM A1008. |
| Fascia End Cap | ABS, square. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall switch, hand held RTS remote, wired wall switch. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades |
PRODUCT LIMITS
| Controls (Motor) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left or Right | 18" | 144" | 18" | 240" |
EX-Series Manual RS
PRODUCT SPECIFICATIONS
| Operation | Crank handle through manual clutch mechanism. |
| Crank | Powder coated cast aluminum. 1:3 Ratio Color: White |
| Crank Handle | Powder coated hollow aluminum tube. Color: White |
| Fabric Holder Insert Strip | Plastic opaque strip to hold roller shade fabric onto tube |
| End Plug | Made from glass nylon. |
| Tube | 2 1/2”, 3 1/4” hollow extruded aluminum(6063-T5) tube. |
| Brackets | 2 9/16” x 3 1/16”, cold rolled steel ASTM A1008. Wall or ceiling mount. White, Black |
| Bracket Cover | White, Black cast aluminum. |
| Internal Bottomrail | 3/4”, 1 3/16”, 1 9/16” hollow extruded galvanized steel tube. |
| Optional Cable/Rod Guide End Plug | Powder coated cast aluminum. Used to position cable or rod. |
| Cable/Rod Fastner | Stainless Steel. Used to fasten Cable or Rod to floor or wall. |
| Cable | Used to guide roller shade when advancing to an open or closed position. |
| Rod | Used to guide roller shade when advancing to an open or closed position. |
| Bottomrail End Cap | Made from glass nylon. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 24" | 192" | 18" | 240" |
EX-Series Motorized RS
PRODUCT SPECIFICATIONS
| Operation | Crank handle through manual clutch mechanism. |
| Crank | Powder coated cast aluminum. 1:3 Ratio Color: White |
| Crank Handle | Powder coated hollow aluminum tube. Color: White |
| Fabric Holder Insert Strip | Plastic opaque strip to hold roller shade fabric onto tube |
| End Plug | Made from glass nylon. |
| Tube | 2 1/2”, 3 1/4” hollow extruded aluminum(6063-T5) tube. |
| Brackets | 2 9/16” x 3 1/16”, cold rolled steel ASTM A1008. Wall or ceiling mount. White, Black |
| Bracket Cover | White, Black cast aluminum. |
| Internal Bottomrail | 3/4”, 1 3/16”, 1 9/16” hollow extruded galvanized steel tube. |
| Optional Cable/Rod Guide End Plug | Powder coated cast aluminum. Used to position cable or rod. |
| Cable/Rod Fastner | Stainless Steel. Used to fasten Cable or Rod to floor or wall. |
| Cable | Used to guide roller shade when advancing to an open or closed position. |
| Rod | Used to guide roller shade when advancing to an open or closed position. |
| Bottomrail End Cap | Made from glass nylon. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Motor) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left or Right | 40" | 192" | 18" | 240" |
X-Series Manual RS
PRODUCT SPECIFICATIONS
| Operation | Crank handle through manual clutch mechanism. |
| Crank | Powder coated cast aluminum. 1:3 Ratio Color: White |
| Crank Handle | Powder coated hollow aluminum tube. Color: White |
| Fabric Holder Insert Strip | Plastic opaque strip to hold roller shade fabric onto tube |
| End Plug | Made from glass nylon. |
| Tube | 2 1/2”, 3 1/4” hollow extruded aluminum(6063-T5) tube. |
| Brackets | 2 9/16” x 3 1/16”, cold rolled steel ASTM A1008. Wall or ceiling mount. White, Black. |
| Bracket Cover | White, Black cast aluminum. |
| Internal Bottomrail | 3/4”, 1 3/16”, 1 9/16” hollow extruded galvanized steel tube. |
| Optional Cable/Rod Guide End Plug | Powder coated cast aluminum. Used to position cable or rod. |
| Cable/Rod Fastner | Stainless Steel. Used to fasten Cable or Rod to floor or wall. |
| Cable | Used to guide roller shade when advancing to an open or closed position. |
| Rod | Used to guide roller shade when advancing to an open or closed position. |
| Bottomrail End Cap | Made from glass nylon. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 24" | 192" | 18" | 240" |
X-Series Motorized RS
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal –overload protection, brake, permanently lubricated bearings and limit switches. |
| Motor Drive | Plastic nylon disc designed to fit on end of motor to allow motor to rotate roller tube. |
| Fabric Holder Insert Strip | Plastic opaque strip to hold roller shade fabric onto tube. |
| End Plug | Made from glass nylon. |
| Tube | 2 1/2”, 3 1/4” hollow extruded aluminum(6063-T5) tube. |
| Brackets | 2 9/16” x 3 1/16”, cold rolled steel ASTM A1008. Wall or ceiling mount. White, Black. |
| Bracket Cover | White, Black cast aluminum |
| Internal Bottomrail | 3/4”, 1 3/16”, 1 9/16” hollow extruded galvanized steel tube. |
| Optional Cable/Rod Guide End Plug | Powder coated cast aluminum. Used to position cable or rod. |
| Cable/Rod Fastner | Stainless Steel. Used to fasten Cable or Rod to floor or wall. |
| Cable | Used to guide roller shade when advancing to an open or closed position. |
| Rod | Used to guide roller shade when advancing to an open or closed position. |
| Bottomrail End Cap | Made from glass nylon. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RF wall switch, hand held RF remote, DC wall switch. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Motor) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left or Right | 40" | 192" | 18" | 240" |
3” Z-Series Dual Manual RS
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from PA6. |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, to use Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel optional see manufactures chart for size recommendation. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 3”x 2 1/4” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Round Fascia | Round front, 3”x2 7/8” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Fascia End Cap | ABS, round or square. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Brackets | 5 1/2” x 2 3/4”, cold rolled steel ASTM A1008. Wall or ceiling mount. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x 9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at extra cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-Carbonite. Shall comply with all safety requirements. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 78" | 18" | 108" |
| Clutch Left or Right with Spring Assist | 36" | 156" | 18" | 240" |
3” Z-Series Dual Motorized RS
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings and limit switches. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 3”x 2 1/4” extruded aluminum(6063-T5). ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black |
| Round Fascia | Round front, 3”x 2 7/8” extruded aluminum(6063-T5). ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Square Fascia End Cap | ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Round Fascia End Cap | ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Brackets | 5 1/2” x 2 3/4”, cold rolled steel ASTM A1008. Wall or ceiling mount. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x 1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x 9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at extra cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall Switch, hand held RTS remote, wired wall switch. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Motor) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left | 20" | 156" | 18" | 240" |
| Motor Right | 20" | 156" | 18" | 240" |
3” Z-Series Manual RS
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from PA6. |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, to use Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel optional see manufactures chart for size recommendation. Is not compatible with 1 1/4” tube. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 3”x 2 1/4” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Round Fascia | Round front, 3”x2 7/8” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Fascia End Cap | ABS, round or square. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Brackets | 3” x 3” x 3/4”, cold rolled steel ASTM A1008. Wall or ceiling mount. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-Carbonite. Shall comply with all safety requirements. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 78" | 18" | 108" |
| Clutch Left or Right with Spring Assist | 36" | 156" | 18" | 240" |
3” Z-Series Motorized RS
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings and limit switches. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4”, 2”, 2 3/8” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 3”x 2 1/4” extruded aluminum(6063-T5). ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Round Fascia | Round front, 3”x 2 7/8” extruded aluminum(6063-T5). ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Square Fascia End Cap | ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Round Fascia End Cap | ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Brackets | 3” x 3” x 3/4”, cold rolled steel ASTM A1008. Wall or ceiling mount. Colors: White, Bronze, Alabaster, Anodized, Black |
| Internal Hembar | 1/8”x 1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x 9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at extra cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall Switch, hand held RTS remote, wired wall switch. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Motor) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left | 16" | 156" | 18" | 240" |
| Motor Right | 16" | 156" | 18" | 240" |
4” Z-Series Dual Manual RS
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from PA6. |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, to use Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel optional see manufactures chart for size recommendation. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 4”x 2 3/4” extruded aluminum(6063-T5). Colors to match brackets and end caps. |
| Round Fascia | Round front, 4”x 3 11/32” extruded aluminum(6063-T5). Colors to match brackets and end caps. |
| Fascia End Cap | ABS, round or square. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Brackets | 5 7/8” x 4 1/8”, cold rolled steel ASTM A1008. Wall or ceiling mount. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x 9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at extra cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-Carbonite. Shall comply with all safety requirements. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
| Idle End Insert Plate | 5” x 3” , cold rolled steel ASTM A1008. Wall or ceiling mount. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Clutch Insert Plate | 5” x 3” , cold rolled steel ASTM A1008. Wall or ceiling mount. Colors: White, Bronze, Alabaster, Anodized, Black. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 78" | 18" | 108" |
| Clutch Left or Right with Spring Assist | 36" | 156" | 18" | 240" |
4” Z-Series Dual Motorized RS
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings and limit switches. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 4”x 2 3/4” extruded aluminum(6063-T5). Colors to match brackets and end caps. |
| Round Fascia | Round front, 4”x 3 11/32” extruded aluminum(6063-T5). Colors to match brackets and end caps. |
| Square Fascia End Cap | ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Round Fascia End Cap | ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Brackets | 5 7/8” x 4 1/8”, cold rolled steel ASTM A1008. Wall or ceiling mount. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x 1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x 9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at extra cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall Switch, hand held RTS remote, wired wall switch. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
| Idle End Insert Plate | 5” x 3” , cold rolled steel ASTM A1008. Wall or ceiling mount. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Clutch Insert Plate | 5” x 3” , cold rolled steel ASTM A1008. Wall or ceiling mount. Colors: White, Bronze, Alabaster, Anodized, Black. |
PRODUCT LIMITS
| Controls (Motor) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left | 20" | 156" | 18" | 240" |
| Motor Right | 20" | 156" | 18" | 240" |
4” Z-Series Manual RS
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from PA6. |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, to use Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel optional see manufactures chart for size recommendation. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4”, 2”, 2 3/8” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 4”x 2 3/4” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black |
| Round Fascia | Round front, 4”x3 11/32” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Back Fascia | Square front and back, 4”x1/8” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Brackets | 4” x 4” x 3/4”, cold rolled steel ASTM A1008. Wall or ceiling mount. |
| Fascia End Cap | ABS, round or square. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-Carbonite. Shall comply with all safety requirements. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 78" | 18" | 108" |
| Clutch Left or Right with Spring Assist | 36" | 156" | 18" | 240" |
4” Z-Series Motorized RS
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings and limit switches. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4”, 2”, 2 3/8” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 4”x 2 3/4” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Round Fascia | Round front, 4”x 3 11/32” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Brackets | 4” x 4” x 3/4”, cold rolled steel ASTM A1008. Wall or ceiling mount. Colors: White, Bronze, Alabaster, Anodized, Black |
| Square Fascia End Cap | ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Round Fascia End Cap | ABS Plastic. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x 9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at extra cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall Switch, hand held RTS remote, wired wall switch. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Motor) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left | 20" | 156" | 18" | 240" |
| Motor Right | 20" | 156" | 18" | 240" |
5.5” - 7” Z-Series Specs
5.5” Z-Series Fascia Manual RS Single Shade
5.5” Z-Series Headbox Manual RS Single Shade
5"x5.5" Dual Lip Headbox
5.5" Z-Series Fascia Motorized RS Single Shade
5.5" Z-Series Headbox Motorized RS Single Shade
7" Z-Series Fascia Manual RS Dual Shade
7" Z-Series Headbox Motorized RS Dual Shade
7" Z-Series Fascia Motorized RS Dual Shade
5.5” Z-Series Fascia Manual RS Single Shade
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from Acetal POM Copolymer. |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, to use Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel optional see manufactures chart for size recommendation. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4”, 2”, 2 3/8” diameter hollow extruded aluminum(6063-T5) tube. |
| Clutch Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Idle End Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Square Fascia | Square front, 4 7/8”x 3/8” extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Brackets | 5 1/2” x 5 3/16”, cold rolled steel ASTM A1008, Zinc plated. Wall or ceiling mount. |
| Fascia Spring Lock | Holds fascia to brackets. Spring Steel 65MN, ASTM1566, Zinc plated. |
| Bottom Closure Panel | 2”, 3”, 4” wide extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Fascia End Cap | ABS, square, colors to match fascia. Colors White, Bronze, Anodized. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-Carbonite. Shall comply with all safety requirements. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 78" | 18" | 108" |
| Clutch Left or Right with Spring Assist | 36" | 156" | 18" | 240" |
5.5” z-series headbox manual rs single shade
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from Acetal POM Copolymer. |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, to use Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel optional see manufactures chart for size recommendation. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4”, 2”, 2 3/8” diameter hollow extruded aluminum(6063-T5) tube. |
| Clutch Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Idle End Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Side Closure Panel | Square front, 2 3/4”x 3/8” with 3/4” wide lip for ACT to lay on, extruded aluminum, 6063-T5. Colors White |
| Brackets | 5 1/2” x 5 3/16”, cold rolled steel ASTM A1008, Zinc plated. Wall or ceiling mount. |
| Bottom Closure Panel | 2”, 3”, 4” wide extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-Carbonite. Shall comply with all safety requirements. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 78" | 18" | 108" |
| Clutch Left or Right with Spring Assist | 36" | 156" | 18" | 240" |
5"x5.5" dual lip headbox
PRODUCT SPECIFICATIONS
| Head Box | 4 15/16”x 5 3/8” x 3/4” extruded aluminum (6063-T5). Color White. |
| Closure Lips | Dual closure lips for bottom closure panel, panel van be mounted for front or back roll of roller shade fabric. |
| ACT Lip | 3/4” wide lip on outside of Head Box for acoustic ceiling tile to rest on. |
| Mounting | Attach to framing substrate or inside framed pocket in ceiling, with pan head screws. Screw type and size TBD on site per site conditions. |
PRODUCT LIMITS
| Min. Width | As needed for smallest shade. | |||
| Max. Width | 20’, can be butted together for longer applications. |
5.5” Z-Series Fascia Motorized RS Single Shade
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings, limit switch. |
| Tube Drive | PA6 plastic. |
| Idle End | Made from glass fiber reinforced PA6. |
| Crown | ABS plastic. |
| Tube | 1 1/2”, 2”, 2 3/8” diameter hollow extruded aluminum(6063-T5) tube. |
| Motor Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Idle End Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Square Fascia | Square front, 4 7/8”x 3/8” extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Brackets | 5 1/2” x 5 3/16”, cold rolled steel ASTM A1008, Zinc plated. Wall or ceiling mount. |
| Fascia Spring Lock | Holds fascia to brackets. Spring Steel 65MN, ASTM1566, Zinc plated. |
| Fascia End Cap | ABS, square, colors to match fascia. Colors White, Bronze, Anodized. |
| Bottom Closure Panel | 2”, 3”, 4” wide extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall Switch, hand held RTS remote, wired wall switch. |
| Size | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Motorized) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left | 26" | 176" | 18" | 240" |
| Motor Right | 26" | 156" | 18" | 240" |
5.5” Z-Series Headbox Motorized RS Single Shade
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings, limit switch. |
| Tube Drive | PA6 plastic. |
| Idle End | Made from glass fiber reinforced PA6. |
| Crown | ABS plastic. |
| Tube | 1 1/2”, 2”, 2 3/8” diameter hollow extruded aluminum(6063-T5) tube. |
| Motor Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Idle End Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Side Closure Panel | Square front, 2 3/4”x 3/8” with 3/4” wide lip for ACT to lay on, extruded aluminum, 6063-T5. Colors White. |
| Brackets | 5 1/2” x 5 3/16”, cold rolled steel ASTM A1008, Zinc plated. Wall or ceiling mount. |
| Bottom Closure Panel | 2”, 3”, 4” wide extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall Switch, hand held RTS remote, wired wall switch. |
| Size | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Motorized) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left | 26" | 156" | 18" | 240" |
| Motor Right | 26" | 156" | 18" | 240" |
7” Z-Series Fascia Manual RS Dual Shade
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from Acetal POM Copolymer. |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, to use Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel optional see manufactures chart for size recommendation. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4”, 2 3/8” diameter hollow extruded aluminum(6063-T5) tube. |
| Clutch Insert Plate | 4 1/16” x 7”, cold rolled steel ASTM A1008, Zinc plated. |
| Idle End Insert Plate | 4 1/16” x 7”, cold rolled steel ASTM A1008, Zinc plated. |
| Square Fascia | 7 1/4”x 2 13/16” extruded aluminum, 6063-T5. Colors White, Bronze, Alabaster, Anodized, Black |
| Brackets | 5 5/8” x 7 7/16”, cold rolled steel ASTM A1008, Zinc plated. Wall or ceiling mount. |
| Fascia End Cap | ABS, square, colors to match fascia. Colors White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-Carbonite. Shall comply with all safety requirements. |
| Size | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 78" | 18" | 108" |
| Clutch Left or Right with Spring Assist | 36" | 156" | 18" | 240" |
7” Z-Series Headbox Motorized RS Dual Shade
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings, limit switch. |
| Tube Drive | PA6 plastic. |
| Idle End | Made from glass fiber reinforced PA6. |
| Crown | ABS plastic. |
| Tube | 1 1/2”, 2”, 2 3/8” diameter hollow extruded aluminum(6063-T5) tube. |
| Motor Insert Plate | 6” x 7”, cold rolled steel ASTM A1008, Zinc plated. |
| Idle End Insert Plate | 6” x 7”, cold rolled steel ASTM A1008, Zinc plated. |
| Side Closure Panel | Square front, 2 3/4” x 3/8” with 3/4”wide lip for ACT to lay on, extruded aluminum, 6063-T5. Colors White. |
| Brackets | 5 1/2” x 5 3/16”, cold rolled steel ASTM A1008, Zinc plated. Wall or ceiling mount. |
| Bottom Closure Panel | 2”, 3”, 4” wide extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall Switch, hand held RTS remote, wired wall switch. |
| Size | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Motorized) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left | 26" | 176" | 18" | 240" |
| Motor Right | 26" | 156" | 18" | 240" |
7” Z-Series Fascia Motorized RS Dual Shade
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings, limit switch. |
| Tube Drive | PA6 plastic. |
| Idle End | Made from glass fiber reinforced PA6. |
| Crown | ABS plastic. |
| Tube | 1 1/2”, 2”, 2 3/8” diameter hollow extruded aluminum(6063-T5) tube. |
| Motor Insert Plate | 4 1/16” x 7”, cold rolled steel ASTM A1008, Zinc plated. |
| Idle End Insert Plate | 4 1/16” x 7”, cold rolled steel ASTM A1008, Zinc plated. |
| Square Fascia | 7 1/4”x 2 13/16” extruded aluminum, 6063-T5. Colors White, Bronze, Alabaster, Anodized, Black. |
| Brackets | 5 1/2” x 5 3/16”, cold rolled steel ASTM A1008, Zinc plated. Wall or ceiling mount. |
| Fascia End Cap | ABS, square, colors to match fascia. Colors White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall Switch, hand held RTS remote, wired wall switch. |
| Size | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Motorized) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left | 26" | 176" | 18" | 240" |
| Motor Right | 26" | 156" | 18" | 240" |
Open Roll Z-Series Manual RS
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from PA6 with glass fibers. Colors: Black, White |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, to use Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel optional see manufactures chart for size recommendation. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. Color to match clutch. |
| Tube | 1 1/4”, 1 1/2”, 1 3/4”, 2” hollow extruded aluminum(6063-T5) tube. |
| Brackets | 1 15/16”x2 7/16”, 2’x25 5/8”, 2 9/16”x3 1/16”, cold rolled steel ASTM A1008. Wall or ceiling mount. White, Black. |
| Bracket Covers | White, Black plastic |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at extra cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-carbonite. Shall comply with all safety requirements. |
| Size | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 78" | 18" | 108" |
| Clutch Left or Right with Spring Assist | 36" | 156" | 18" | 240" |
System 32 Open Roll Z-Series Manual RS
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| System 32 Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from PA6 with glass fibers. Color: Black, White. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. Color to match clutch. |
| Tube | 1 1/4” hollow extruded aluminum(6063-T5) tube. |
| Brackets | 1 15/16”x2 7/16”cold rolled steel ASTM A1008. Wall or ceiling mount. White, Black. |
| Bracket Covers | White, Black plastic. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at extra cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-carbonite. Shall comply with all safety requirements. |
| Size | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 156" | 18" | 240" |
| Clutch Left or Right with Spring Assist | 18" | 156" | 18" | 240" |
System 45 Open Roll Z-Series Manual RS
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| System 45 Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from PA6 with glass fibers. Colors: Black, White. |
| Spring Assist | Spring assembly to assist in raising and lowering of heavy roller shades, used at manufacturers discretion. Mounted on the clutch inside the tube. Made of PBT with Glass Fiber and spring steel. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. Color to match clutch. |
| Tube | 1 3/4” hollow extruded aluminum(6063-T5) tube. |
| Brackets | 2 9/16” x 3 1/16”, cold rolled steel ASTM A1008. Wall or ceiling mount. White, Black. |
| Bracket Covers | White, Black plastic. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at extra cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-carbonite. Shall comply with all safety requirements. |
| Size | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 156" | 18" | 240" |
| Clutch Left or Right with Spring Assist | 18" | 156" | 18" | 240" |
| Spring Assist | 36" | 156" | 18" | 240" |
Open Roll Z-Series Motorized RS
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings and limit switches. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/4”, 1 1/2”, 1 3/4”, 2” hollow extruded aluminum(6063-T5) tube. |
| Brackets | 2’x25 5/8”, 2 9/16”x3 1/16”, cold rolled steel ASTM A1008. Wall or ceiling mount. White, Black. |
| Bracket Covers | White, Black plastic. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at extra cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall Switch, hand held RTS remote, wired wall switch. |
| Size | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Motorized) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 156" | 18" | 240" |
| Clutch Left or Right with Spring Assist | 18" | 156" | 18" | 240" |
System 40 Open Roll Z-Series Motorized RS
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| System 40 Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from PA6 with glass fibers. Colors: Black, White. |
| Spring Assist | Spring assembly to assist in raising and lowering of heavy roller shades, used at manufacturers discretion. Mounted on the clutch inside the tube. Made of PBT with Glass Fiber and spring steel. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. Color to match clutch. |
| Tube | 1 1/2” hollow extruded aluminum(6063-T5) tube. |
| Brackets | 2”x 2 5/8”, cold rolled steel ASTM A1008. Wall or ceiling mount. White, Black. |
| Bracket Cover | White, Black plastic. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at extra cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-carbonite. Shall comply with all safety requirements. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Motorized) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left | 18" | 156" | 18" | 240" |
| Clutch Right | 18" | 156" | 18" | 240" |
| Spring Assist | 36" | 156" | 18" | 240" |